Buscar

Borrar filtros
Filtrado por: Creador Palei, Vitali Eliminar la restricciónCreador: Palei, Vitali Departamento Aerospace Engineering and Engineering Mechanics Eliminar la restricciónDepartamento: Aerospace Engineering and Engineering Mechanics

Resultados de la búsqueda

  • Experimental estimation of a D-shaped cylinder wake using body-mounted sensors

    Article thumbnail: Experimental estimation of a D-shaped cylinder wake using body-mounted sensors
    Type:
    Article
    Descripción/Resumen:
    The effectiveness of a small array of body-mounted sensors, for estimation and eventually feedback flow control of a D-shaped cylinder wake is investigated experimentally. The research is aimed at suppressing unsteady loads resulting from the von-Kármán vortex shedding in the wake of bluff-bodies at a Reynolds number range of 100–1,000. A low-dimensional proper orthogonal decomposition (POD) procedure was applied to the stream-wise and cross-stream velocities in the near wake flow field, with steady-state vortex shedding, obtained using particle image velocimetry (PIV). Data were collected in the unforced condition, which served as a baseline, as well as during influence of forcing within the “lock-in” region. The design of sensor number and placement was based on data from a laminar direct numerical simulation of the Navier-Stokes equations. A linear stochastic estimator (LSE) was employed to map the surface-mounted hot-film sensor signals to the temporal coefficients of the reduced order model of the wake flow field in order to provide accurate yet compact estimates of the low-dimensional states. For a three-sensor configuration, results show that the estimation error of the first two cross-stream modes is within 20–40% of the PIV-generated POD time coefficients. Based on previous investigations, this level of error is acceptable for a moderately robust controller required for feedback flow control.
    Creador/Autor:
    Cohen, Kelly; Stalnov, Oksana; Fono, Ilan; Seifert, Avi, and Palei, Vitali
    Peticionario:
    Kelly Cohen
    Fecha modificada:
    02/10/2017
    Fecha modificada:
    04/05/2017
    Fecha de creacion:
    2007-02
    Licencia:
    All rights reserved