Buscar
Filtrado por:
Creador
Seidel, Jurgen
Eliminar la restricciónCreador: Seidel, Jurgen
Departamento
Aerospace Engineering and Engineering Mechanics
Eliminar la restricciónDepartamento: Aerospace Engineering and Engineering Mechanics
1 - 3 de 3
El número de resultados a mostrar por página
Resultados de la búsqueda
-
- Type:
- Article
- Descripción/Resumen:
- Feedback flow control of the wake of a circular cylinder at a Reynolds number of 100 is an interesting and challenging benchmark for controlling absolute instabilities associated with bluff body wakes. A two dimensional computational fluid dynamics simulation is used to develop low-dimensional models for estimator design. Actuation is implemented as displacement of the cylinder normal to the flow. The estimation approach uses a low dimensional model based on a truncated 6 mode Double Proper Orthogonal Decomposition (DPOD) applied to the streamwise velocity component of the flow field. Sensor placement is based on the intensity of the resulting spatial modes. A non-linear Artificial Neural Network Estimator (ANNE) was employed to map the velocity data to the mode amplitudes of the DPOD model. For a given four sensor configuration, developed using a previously validated strategy, ANNE performed better than two state-of-the-art approaches, namely, a Quadratic Stochastic Estimator (QSE) and a Linear Stochastic Estimator with time delays (DSE).
- Creador/Autor:
- Cohen, Kelly; Mclaughlin, Thomas; Seidel, Jurgen; Siegel, Stefan, and Aradag, Selin
- Peticionario:
- Kelly Cohen
- Fecha modificada:
- 02/13/2017
- Fecha modificada:
- 04/05/2017
- Fecha de creacion:
- 2011-07
- Licencia:
- All rights reserved
-
- Type:
- Article
- Descripción/Resumen:
- Low-dimensional models have proven essential for feedback control and estimation of flow fields. While feedback control based on global flow estimation can be very efficient, it is often difficult to estimate the flow state if structures of very different length scales are present in the flow. The conventional snapshot-based proper orthogonal decomposition (POD), a popular method for low-order modeling, does not separate the structures according to size, since it optimizes modes based on energy. Two methods are developed in this study to separate the structures in the flow based on size. One of them is Hybrid Filtered POD method and the second one is 3D FFT-based Filtered POD approach performed using a fast Fourier transform (FFT)-based spatial filtering. In both the methods, a spatial low-pass filter is employed to precondition snapshot sets before deriving POD modes. Three-dimensional flow data from the simulation of turbulent flow over a circular cylinder wake at Re=20000 is used to evaluate the performance of the two methods. Results show that both the FFT-based 3D Filtered POD and Hybrid Filtered POD are able to capture the large-scale features of the flow, such as the von Karman vortex street, while not being contaminated by small-scale turbulent structures present in the flow.
- Creador/Autor:
- Cohen, Kelly; Seidel, Jurgen; Siegel, Stefan; McLaughlin, Thomas, and Aradag, Selin
- Peticionario:
- Kelly Cohen
- Fecha modificada:
- 02/13/2017
- Fecha modificada:
- 04/05/2017
- Fecha de creacion:
- 2011-05
- Licencia:
- All rights reserved
-
- Type:
- Article
- Descripción/Resumen:
- For the systematic development of feedback flow controllers, a numerical model that captures the dynamic behaviour of the flow field to be controlled is required. This poses a particular challenge for flow fields where the dynamic behaviour is nonlinear, and the governing equations cannot easily be solved in closed form. This has led to many versions of low-dimensional modelling techniques, which we extend in this work to represent better the impact of actuation on the flow. For the benchmark problem of a circular cylinder wake in the laminar regime, we introduce a novel extension to the proper orthogonal decomposition (POD) procedure that facilitates mode construction from transient data sets. We demonstrate the performance of this new decomposition by applying it to a data set from the development of the limit cycle oscillation of a circular cylinder wake simulation as well as an ensemble of transient forced simulation results. The modes obtained from this decomposition, which we refer to as the double POD (DPOD) method, correctly track the changes of the spatial modes both during the evolution of the limit cycle and when forcing is applied by transverse translation of the cylinder. The mode amplitudes, which are obtained by projecting the original data sets onto the truncated DPOD modes, can be used to construct a dynamic mathematical model of the wake that accurately predicts the wake flow dynamics within the lock-in region at low forcing amplitudes. This low dimensional model, derived using nonlinear artificial neural network based system identification methods, is robust and accurate and can be used to simulate the dynamic behaviour of the wake flow. We demonstrate this ability not just for unforced and open-loop forced data, but also for a feedback-controlled simulation that leads to a 90% reduction in lift fluctuations. This indicates the possibility of constructing accurate dynamic low-dimensional models for feedback control by using unforced and transient forced data only.
- Creador/Autor:
- Luchtenburg, D. M.; Cohen, Kelly; Seidel, Jurgen; Fagley, Casey, and Siegel, Stefan G.
- Peticionario:
- Kelly Cohen
- Fecha modificada:
- 02/10/2017
- Fecha modificada:
- 04/05/2017
- Fecha de creacion:
- 2008-09
- Licencia:
- All rights reserved