In this paper we report on new challenges when teaching UX students how to sketch and prototype their designs. We argue that UX students sketch and prototype differently than other design students, and we discuss how changes in the field necessitate a response in education. We describe sketching and prototyping as a continuum that students successfully traverse when they follow a process of ‘double loop learning’. We highlight three new challenges: (1) New computational design materials, (2) new maker tools, and (3) changes within the tech industry. We explore these three challenges through examples from our students, and we outline strategies for sketching and prototyping in this new reality. We conclude that this is a starting point for further work on keeping education up to speed with practice.
With the enhancement of medical technology and human living standards, the world is showing a trajectory towards an aging society. The elders generally suffer from degeneration, which may cause problems in their daily lives. Aging has since become a major issue of scientific researches.
Elders in Taiwan mostly live alone or with a partner. Because eating out is not a habit, cooking often plays an important role in their lives. Due to the degeneration happening to their bodies, the danger during cooking activities increases. Therefore, it is necessary for them to seek help from assistive devices.
In this research, we will make assistive design models that help elders use woks. The designs are for the task we have chosen from our investigation. We will also evaluate the effect of the aids objectively using the EMG system, and collect the iEMG value for evaluation. The iEMG values were collected from four muscles (FDC, FCR, Biceps and Deltoids). Eight middle-aged participants who will become elders in the near future were invited to participate in the experiment. Four design solutions were chosen from seven working models. The design solutions were all helpful to the task, and the performances of the stove design solutions are significantly better than the original wok. The degrees of hand trembling while performing tasks were also measured, however the differences were not significant.
The growing speed with which consumers discard artifacts is a significant but regrettable part of the capitalist economy. High consumption rates are accelerated by contemporary society,
which is based on a model of values that link the notion of well being to profit generation and consumption of material goods. This exacerbated consumption cycle perpetuates environmental
damage. In this context, proposing sustainable solutions involves new ways of thinking and doing that are distant from the practices of the current model of consumer society. This paper
reflects on the necessity to implement changes into the design process, production, and consumption modalities. These changes propose a “new” role for designers as professionals, and
as individuals in society at large. This research connects the concepts of metadesign and opens design- enabling system awareness. Metadesign can be considered critical and reflexive thinking about the boundaries and scope of design, but also, as the prefix “meta” implies, it can be understood as the design of the design process, in a critical and reflective way. Open design
implies the openness of the design project for multiple actors (including consumers), information sharing, and building knowledge between them. As a result, design can lead to
consumption modalities situated in slow culture, transforming the relationship between users and artifacts.
Different associations are important for regulating and promoting good practices of sustainable product development. On the case of children products, there are many considerations to take, such as mental and physical development or safety. Knowing this broad challenge, how can associations better aid on the development of Design Guidelines for children? In Japan, the country’s context and challenges have led to the development of the Kids Design Association, or KDA, a Non-Profit organization dedicated on the achievement of three missions: “Contribute to children’s safety”; “Develop children’s capabilities, encouraging creativity and sensitivity”; and “Support caregivers during pregnancy, birth and child raising”. Based on an investigation period, the following paper is a case study of the Kids Design Association, exposing its story, goals, relation with society, growth, and performed activities, especially the “Kids Design Award”, a commendation program for acknowledging design practices that takes children needs and standpoints in consideration. We aimed to observe design trends and challenges regarding both Japanese Society and the association. As results, although some of the procedures are oriented exclusively for Japan, we found that the KDA approach could effectively bridge companies with academic knowledge and social demands.
This study hypothesized that humans give priority perception to product shapes that possess topological structures. Three experiments confirmed the proposition accordingly. The first experiment selected existing products that grab people’s attention within the prescribed time, with the experimental objects selected according to degree of topological properties and structure complexity. The results showed that visual topological properties in the products had strong visual appeal. The second experiment determined the visual prominence of freely designed and redesigned chairs according to the rating of non-expert users. The results demonstrated that products whose shape adopted topological structures were given priority attention. The third experiment intended to prove the practical value of visual topological features from a direction opposite to that of the second experiment; that is, from topological structures to deconstruction of topological structures. All three experiments showed as well that there are many cognitive limitations in the recognition of topological structures in product shapes. These unexpected problems, such as the contradiction between topological structure and habitual cognition, are discussed. The results of the study and the effects of topological properties on development are also discussed.
Today’s design pedagogies lack the characteristics for redressing the nature of the ‘wicked problems’ they attempt to solve, such as sustainability. We argue it is not fair for future generations to suffer the systemic effects of our unsustainable consumer culture, partly resulting from today’s design professionals’ decisions, which ensue because design is an amoral discipline lacking a systemic perspective.
To rectify design’s characteristic failings, as part of a PhD study, we report a new pedagogical architecture founded as the synthesis of the practices of design and civics, forming the relationship design-as-civics (DaC): a practical philosophy. We position DaC as a reflexive, systemic radical political praxis for every citizen, possessing the explicit teleological goal to achieve the ‘good life’ for all.
DaC takes a transdisciplinary approach. It integrates the discoveries of cognitive science and linguistics to expose how we construct our understanding of the world interpreting metaphors and frames, which we utilise to ‘aim’ DaC. Alongside shared social practice theory (SSP) and insights from developmental psychology that reveal the distinctly human capacity of “shared intentionality” engendering humankind’s willingness for cooperation and empathy for fairness. That living in a fairer society is desired by people from rival political perspectives, with egalitarian societies reporting lower environmental impact lifestyles and more willingness for transitioning towards sustainment.
Thus, it is humankind’s cooperative behaviour and aligning values that provides the foundational rationale of DaC’s SSP goal to achieve the ‘good life’ through the ongoing critical examination of its ‘aim’ of resolving ‘fairness between citizens.’
There is considerable interest within the design research domain in the possible cognitive functions and actions as ‘design thinking’ is used. This proposal commences with reference to Senge who suggests, “Truly creative people use the gap between vision and current reality to generate energy for change”. He drew from the musician Fritz, who proposed, “It’s not what the vision is but what the vision does,” (1990, p.153). The imagined ideal in a vision seems to act like a spike setting off self-urging creative intuitions and insights and instinctive reactions. A conceptual series of diagrams will develop these insights where an imagined ideal is to be set up as the vision as the anticipated experience of a ‘best-possible-self’ with success, where emergent ‘ideas-of-best-fit’ closely match the designer’s goals and desires. The triggering mental actions required are similar in form to De Bono’s technique based on ‘Six Colored Hats’ (1985). In this project, however, the practitioner adopts an overarching meaningful ideal for a ‘hat’ in the form of an experiential clear sense of success as motivating ideations emerge, such that these closely match their goals and desires as a ‘best-possible-fit’. The model is also potentially transformative as the visioning ideal could be framed such that any emergent effects of encoded formed bias or a self-limiting psychology could be effectively reduced or eliminated through the applied created differential as a ‘generative gap’ for the self. This paper will further suggest how this envisaged ideal of success could be experientially explored through co-creative action cycles of research in different design-thinking domains.
Identifying Infants can be harder than it seems. Particularly in remote and limited resources settings, rapid and accurate identification of infants presents an unsolved complex sociotechnical problem. Imagine a long line of caregivers, each carrying several children, waiting outside in heat and humidity for required vaccinations. Caregivers may only know the infant's given names: how can the they be identified for record keeping?
Vaccination cards are notoriously unreliably and easily lost, mistakes abound. Recent technologycentered attempts th
In order to develop a new, infant-centered solution from the ground up, we assembled a diverse team of engineers, clinicians, ethnographers and designers and followed a Human Centered Design (HCD) approach of ethnography, rapid prototyping and testing. We examined all common modalities used in adult biometrics-- ear, iris, retina, face, foot, palm and finger recognition and compared technical feasibility, usability and acceptability for the infant use case. We prototyped many infant-centric devices and arrived at lead candidates using modified contact vs non contact palm and finger scanning. Frequent design-test cycles were critical as the complexity and changing nature of infant physiology, behavior and caregiver dynamics could not be predicted, only tested with subjects. This was compounded by moving targets of evolving infant-centric software, hardware and device design.
In summary, we report here an HCD based approach to infant biometrics. We developed and tested robust, socially acceptable technologies that adapt to the tiny, sensitive yet changing fingers of very young infants.
Carnegie Mellon University's School of Design partnered with Cognizant Technology Solutions on a design project for a semester-long elective course called UX Design Tools. The intent was broad in its inception: identify emergent opportunities where technology will play a significant role in people's interactions and experiences. What is the future of physical space? How are advancements in IoT, augmented reality, and telematics influencing how we experience environments?
Students were asked to anchor their problem solving in evolving human needs and to understand the role technology plays. Cognizant's human-centered development approach relies primarily on ethnographic inquiry. This evidenced through integrating their anthropologists from acquired firm Idea Couture, and associates from strategic partner ReD Associates. The interdisciplinary majors from upper-level undergraduate to graduate level students learned to use and create multi- method research approaches to identify unique opportunities.
Seven teams created future scenarios with newly developed physical product designs, digital interfaces, and new service strategies utilizing various technologies. Three case studies highlight a trio of observed emotional themes in relation to how people utilize technology to benefit their daily life or work: self-
election, introduction-exchange, and co-dependency.
This poster presentation will showcase three projects that will serve as examples of how industry and academia act as research and development entities; how to approach research as a
fundamental tenet for innovation and design; and show how breadth and depth of interdisciplinary skills and experience is a necessity in an ever expanding climate of technology push.
Smart home is becoming a focus in both literature and product development practices. The current study employed a human-centered design approach to understand users desires and expectations from their living context. Six critical themes were developed via in-deep interview, field observation, and data analysis. They are house as a supportive friend, atmosphere generator, theme songs for every moment, coordinator and reminder, life memory collector, and routine builder for young generations. Those concepts were partially integrated to define the value proposition for the target user group of parents with young children. This guides the design ideation and video prototyping to illustrator the user experiences. Through a focus group discussion, the design concepts were validated with six potential customers. The results also show that the design concept has the potential to motivate children’s behaviors, help to build their routine, and has the flexibility to fulfill different needs toward the changes of the family’s life cycle.
The deterioration of linguistic abilities is a natural phenomenon along with aging. Therefore, various assessment tools have been developed to measure linguistic abilities of seniors and diagnose
degenerative diseases such as dementia. Although most of the tools are composed of images, there are not many studies focusing on the visual design, which could significantly affect performance of the subject. In this regard, this research aims to suggest a design guideline for linguistic ability assessment tools concerning the key characteristics of the elderly, focusing on visual contents and interface.
Existing related researches were mostly conducted in English speaking countries. In order to assess the language processing abilities of Korean-speaking elders more accurately, it is necessary to develop language processing assessment tools that reflect the unique linguistic features and structure of the Korean language. Regarding the existing tools, there is a lack of research on aging, focusing on ‘verb naming.
In the literature review section, the paper investigated the physical, cognitive and emotional characteristics of the elderly and extracted the key elements to consider when designing for the elderly. Also, design principles were found based on case studies and problem analysis of the existing assessment tools for language processing abilities. Lastly, we created a prototype model using ‘verb naming.’ Using the model, we have conducted an experiment and comparative analysis between different age groups to verify the validity of contents.
In conclusion, we provided a design guideline for visual contents and interface of linguistic assessment tools, focusing on elderly users.
Western cultures focus on salient objects and use categorization for purposes of organizing the environment (an analytic view), whereas, East Asians cultures focus more holistically on relationships and similarities among objects when organizing the environment (a holistic view). Previous research has shown that cognitive approaches differ between cultures: European Americans prefer an analytic style, and East Asians tend to use a holistic style. However, little is known about how cultural differences in cognition relate to aesthetic preferences. In this paper, we explored whether cultural differences arise in preferences for products set in matching vs. mismatching contexts. Participants in a laboratory experiment included European Americans and East Asians. Individually, they viewed images of a variety of furniture products (chairs, coffee tables, and floor lamps) and rated their aesthetic appeal. Each product type appeared in three different contexts: matching (target product shown in its usual in-home context); mismatched (target product shown in an unusual in-home context), and neutral (the target product shown on a white background). For both cultural groups, products were judged to be more aesthetically pleasing in the matching than in the mismatched context. However, ratings for products in mismatching contexts were significantly higher among East Asians. Our findings suggest that those with holistic views (East Asians) are more tolerant of mismatches than are those with more analytic views (European Americans). The implications for product and marketing design include greater attention to context presentation.
Learning pressure affects students’ learning process and performance. Industrial design education emphasizes that operations on real design problems that have heavy working loads may cause learning pressure. The purpose of this study is to explore the issues causing learning pressure and the pressure management strategies of undergraduate industrial design students. There were 297 students who participated in the questionnaire survey. The main findings are as follows: First, learning pressure includes academic pressure, peer pressure, self-expectations, time pressure, financial pressure, pressure from instructors, external pressure, future career, pressure from parents, resource pressure, achievement, and situational pressure. In addition, the main learning pressure is caused by finance, time, resources, external issues, and future career. Second, the pressure management strategies include problem solving, procrastination and escape, help seeking, leisure, emotional management, and self-adjustment. The most useful strategy for managing pressure is leisure, and procrastination and escape is the least useful strategy. Third, all learning pressures are significantly correlated with procrastination and escape strategy, but the coefficients are low. The results can be a reference for industrial design education and related research.
Designing successful products and services that people like, requires an understanding of the context and the aspirations of those people. Over the past decade, a range of methods has been developed to help designers gain such empathy. These have worked well when designer and target user share a cultural context. However, designers often find it difficult to empathize with the user insights of individuals from a culture beyond their first-hand experience. To help designers step beyond this limitation, those user insights need to be placed in a larger understanding of the cultural context. In this paper, we present Cultura: a toolkit that uses nine cultural aspects based on cultural models, informing designers about user insights in a broader cultural context. The toolkit was evaluated in design sessions with four design teams. The findings indicate that Cultura provides inspiration and motivation for designers to gain empathic insights into users beyond their own cultural boundaries and to make effective designs for people.
Developing successful RNPs can bring competitive advantages for companies. However, the success rate of RNPs are relatively low because consumers often feel resistant to adopt
them. One reason for consumers’ resistance is their lack of comprehension of RNPs. To facilitate consumers’ comprehension, this paper conceptually discusses the opportunities related to designing the appearances of RNPs. More specifically, to facilitate consumers’ internal and external learning, this paper explores four underlying mechanisms: 1) product appearance as a visual cue to trigger category-based knowledge transfer, 2) to trigger analogy-based knowledge transfer, 3) product appearance as an information carrier to communicate innovative functionality directly, and 4) product appearance as a way to trigger congruity with innovative functionality of RNPs. The rationales for each underlying
mechanism are conceptually discussed, supported with relevant empirical evidence and examples found in the markets.
High-stakes testing that became the norm after the No Child Left Behind Act of 2001 helped condition students to strive for correct answers for clear problems, all on the first try. However, the iterative process inherent in designing requires risk-taking to conduct a trial-and-error process of defining problems and exploring possible solutions. This design research project was operated with Miami University Graphic Design students to test their willingness to take risks in their coursework to achieve their self-defined measures of success. Students identified that improving their skills was how they defined success. An interaction design assignment involving front-end coding was modified to test students’ comfort taking risks to grow their skills. Most students took risks in the assignment to grow their interaction design skills. The project revealed that closer attention to student motivation when developing learning experiences could help students make the transition to practicing design as an iterative process fraught with risk.
Behaviour insights have been extensively applied to public policy and service design. The potential for an expanded use of behaviour change to healthcare quality improvement has been underlined in the England’s National Health Service Five-Year Forward View report, in which staff behaviour is connected to the quality of care delivered to patients and better clinical practice (NHS, 2014). Improving the quality of healthcare service delivery involves adopting improvement cycles that are conducted by multiple agents through systematic processes of change and evaluation (Scoville et al., 2016). Despite the recognition that some of the recurring challenges to improve healthcare services are behavioural in essence, there is insufficient evidence about how behavioural insights can be successfully applied to quality improvement in healthcare. Simultaneously, the discussion on how to better engage participants in intervention design, and how to better enable participation are not seen as fundamental components of behaviour change frameworks. This paper presents an integrative approach, stemming from comprehensive literature review and an ongoing case study, in which participatory design is used as the conduit to activate stakeholder engagement in the application of a behaviour change framework, aiming to improve the processes of diagnosing and managing urinary tract infection in the emergency department of a hospital in England. Preliminary findings show positive results regarding the combined use of participatory design and behaviour change tools in the development of a shared-vision of the challenges in question, and the collaborative establishment of priorities of action, potential solution routes and evaluation strategies.
Throughout the history of design teaching in Higher Education, there has been an assumption that students need to physically encounter objects to fully understand and appreciate them.
However, in this digital age, the physical encounter has been superseded by the myriad detailed images and information that is readily available on-line and in print.
This concern drew together a museum curator and a 3D Design educator. One was concerned that the digital experience lacked the visceral and emotional experience of engaging with physical objects, and highlighted a difficulty of facilitating access to meaningful, contemporary, objects. The other, whose largely historic collections were increasingly considered “irrelevant” to contemporary design practice, understood the value of materiality as fundamental to a museum’s existence, and its role in teaching and research.
The result was the establishment in 2013 of the “Material & Process Innovation Collection”, a museum quality collection, comprised of objects that are cutting-edge in terms of their material and process-led approaches to making, manufacture and distribution. The collection is driven not only by curatorial concerns, but by teaching and research, challenging the conservatism of museum collecting by taking innovative objects of untested materials and unknown makers, and hands the responsibility of collections development to non-curators.
The research presents an analysis and reflection on bringing the physical back into the classroom, the value of this experience within teaching, learning and research, and reveals if there is merit in the assumption that sensory engagement with physical objects is of greater value than the digital experience.
From the 1980s, design thinking has emerged in companies as a method for practical and creative problem solving, based on designers’ way of thinking, integrated into a rational and iterative model to accompany the process. In companies, design thinking helped valuing creative teamwork, though not necessarily professional designers’ expertise. By pointing out two blind spots in design thinking models, as currently understood and implemented, this paper aims at shedding light on two rarely described traits of designers’ self. The first relies in problem framing, a breaking point that deeply escapes determinism. The second blind spot questions the post project process. We thus seek to portray designers’ singularity, in order to stimulate critical reflection and encourage the opening-up to design culture. Companies and organizations willing to make the most of designers’ expertise would gain acknowledging their critical heteronomy to foster innovation based on strong and disruptive visions, beyond an out-of-date problem solving approach to design.
Solution-generation design behavior in general, and "reflection-in-action" in particular, can serve to differentiate designers, recognizing their personal reflecting when designing. In psychology, reflection is found a more robust tool to enhance task performance after feedback from a personal "device" that generates the process itself while interacting with visual representation. Differences among students' interior design processes appear in their solution-generation design behavior. A “think aloud” experiment identified solution-generation behavior profiles. Qualitative and quantitative methodologies showed how design characteristics unite, forming patterns of design behavior. A comprehensive picture of designers’ differences emerged.
The research aimed:
to identify individual design students’ solution-generation profiles based on design characteristics.
to show how reflection-in-action appearing in the profiles can serve to predict how novice designers learn and act when solving a design problem.
to enhance the uniqueness of reflection-in-action for designers as distinct from reflection in other fields.
Four distinct solution-generation profiles emerged, each showing a different type of reflective acts. Identifying reflection-in-action type can robustly predict how designers develop design solutions and help develop pedagogical concepts, strategies and tools.
In the past decades, universities’ involvement in socio-economic development, which goes along with their teaching and researching activities, has defined a new role for them in society’s ecosystem. This new role is often referred with the term of “entrepreneurial” university, whose objectives are positive societal, economic and environmental impacts. In order to fulfil such objectives, entrepreneurial universities might engage in cross-sector collaborations with external organisations. Despite the great contributions that cross-sector collaboration can give to the partners involved, the outcome is mostly unfocussed and rarely embedded. This paper explores the outcome embedding in the cross-sector collaboration between entrepreneurial universities and the private sector. To this end, we provide the case of the collaboration between a Dutch airline company and four Dutch entrepreneurial research and teaching institutions. We aim to uncover hindering and enabling factors to the outcome embedding in order to design an interaction platform, design it together. This platform will be a tool to encourage the outcome embedding, moving from being inspired by to the actual implementation of the cross-sector collaboration. In order to fulfill this goal, this study employs a research through design methodology. This approach is a generative process, where cyclic loops of iterations and evaluations with stakeholders tend to the research goal. The solution is a digital platform, co-created with all stakeholders. This study can inspire practitioners and future research on the problem of unsuccessful cross-sector collaborations, between entrepreneurial universities and external organisations, with more emphasis on the value of embedding and translating the outcomes.
The purpose of Experience Group Sessions is to identify the health and lifestyle challenges that make it difficult for patients and families to manage chronic medical conditions. The Innovation Engine at Carolinas HealthCare System worked with pediatricians to identify and recruit patients with chronic asthma. Experience Group Sessions were a way for families and patients to share their experiences managing asthma and allowed facilitators to gather insights about what does and does not happen in their daily lives. The key themes and quotes collected from the Experience Group Sessions were grouped into three categories of outcomes that define success with health: capability, comfort and calm. The results of the analysis were shared with the workgroup to inform the design and strategy for an integrated practice unit. Integrated practice units are intended to bring together a full range of providers and services to specifically address a certain medical condition, in this case, pediatric asthma at Carolinas HealthCare System. This integrated practice model will be reorganized around patient-centered care and value to improve overall health for children with asthma.
Effective university-industry collaboration has become a major focus for governments in recent years. Universities are increasingly expected to play a greater role in the innovation system and evidence their contribution to economic development. At the same time, the growth in research quality assessment exercises makes it imperative that the excellence of research conducted in commercially-driven activities can be appropriately evaluated. This paper explores the challenge of reconciling commercially-focused activity and research quality assessment in design. Semi- structured interviews were conducted with thirteen experts including representatives from the design discipline, other applied academic disciplines, research quality assessment leaders and commercial designers. The interviews identified a number of barriers to demonstrating research excellence in commercially-driven projects. These were classified as barriers resulting from: the nature of industry/academic relationships; the nature of the project; and the nature of the research quality assessment. It is concluded that there is a need to build a simple, easily usable framework for assessing the research potential of commercially-driven design projects from the outset to ensure that the appropriate processes are put in place to communicate research conducted within them.
Living in a modern society is becoming more complex, so in order to keep up with, a person should accomplish various kinds of task at once. Daily life requirements, obligations and the capacity of human memory lead us to collect and control our behaviors, bodies and lives through self-tracking devices. Aim of this paper analysis of emerging digitalized self-tracking trend through content analysis of Wired Magazine. Wired Magazine, both in printed and online, monthly, publish technology related articles how emerging technologies affect culture, the economy and politics. It reaches more than 30 million people each month through wired.com, digital edition. Since the term 'quantified self' emerged for the first time in Wired Magazine, for this reason Wired Magazine is one of the most important sources to be used for content analysis. This present study carries out a content analysis of all the issues until December 2016 through 'self-tracking' and two other related terms: 'quantified self' and 'lifelogging'. The usage period and popularity of these terms and, the relation network with the main topics and the subtopics are examined. As a result, it is possible to define wired magazine as a medium in which industry-academia and users come together and, feed each other reciprocally. Wired Magazine have contributed significantly and continues to contribute to the development of the digitalized self-tracking trend in terms of its content.
When design works with industry it tries to sell two things, first, selling design as an agent of transformation, and second, selling design as a skill. Whilst historically design has been successful in the latter, it is the former that is more challenging, making it a necessity for design to work in none design contexts in order to build trust and credibility. Therefore, it is necessary to investigate the ways in which design interacts with industry, and how these interactions enable design to establish longer term relationships.
This investigation set out to answer the question, what design specific characteristics are applied to establish successful longer-term relationships between design and industry? The paper aims to illustrate the intrinsic factors that enable design to get access, and designers to get authority to play a significant role in organisations. Five well-established relationships between design and industry have been used to analyse to find correlations.
The investigation identifies three stages of collaboration between design and industry, namely, involvement, collaboration and partnerships, contrary to Cahill’s (1965) theoretical model, which claimed four stages to long lasting partnerships. Also, the case studies confirm three stages of trust and credibility as factors that help in strengthening a relationship between design and industry. Finally, several intrinsic factors that are unique to design have been identified, which are seen to have helped design in building high levels of trust and credibility.
Most academic methodologies are developed from a prescribed methodological process that is limited to a specific area of study. However, the disciplinary landscape in which the knowledge is established is being rapidly reconfigured. Given the vast varieties of practices and knowledge base required from information designers, it is even more crucial for them to look outside of the traditional visual design fields and seek diversities for better research and creation methods.
The two disciplines, software engineering and information design, are often perceived as one provides technical solutions to the other. This essay intends to move beyond the common perception, and identify relevant issues in software engineering design that resonate with the information design process. The issues include the multi-component planning approach; the human-oriented agile method; design concepts such as abstraction, decomposition, component modularity, hierarchical relationship, and extensibility. The perspectives from software engineering design and information design is examined through units of analysis, terminology explanations, and forms of communications. The collective design methods and principles provide a systematic framework to the methodological thinking in information design. The discussion serves the purpose of encouraging more conceptual-based conversations between information design and other disciplines, especially in the fields of science and technology.
Futures techniques have long been used in large enterprises as designerly means to explore the future and guide innovation. In the automotive industry, for instance, the development of concept cars is a technique which has repeatedly proven its value. However, while big companies have broadly embraced futures techniques, small- and medium-sized enterprises (SMEs) have lagged behind in applying them, largely because they are too resource- intensive and poorly suited to the SMEs’ needs and idiosyncrasies. To address this issue, we developed DIVE: Design, Innovation, Vision, and Exploration, a design-led futures technique for SMEs. Its development began with an inquiry into concept cars in the automotive industry and concept products and services in other industries. We then combined the insights derived from these design practices with elements of the existing techniques of critical design and design fiction into the creation of DIVE’s preliminary first version, which was then applied and evaluated in two iterations with SMEs, resulting in DIVE’s alpha version. After both iterations in context, it seems that DIVE suits the SMEs because of its compact and inexpensive activities which emphasize making and storytelling. Although the results of these activities might be less flashy than concept cars, these simple prototypes and videos help SMEs internalize and share a clear image of a preferable future, commonly known as vision. Developing DIVE thus helped us explore how design can support SMEs in envisioning the future in the context of innovation.
Two German pioneers of sensory development education, Christof Drexel (1886-1979) and Hugo Kükelhaus (1900-1984) pursued methodical investigations into perceptual principles of cognition and design in order to discover the ways in which aesthetic principles can develop and guide sensory response. Drexel and Kükelhaus traveled parallel investigative paths, both merging formal aesthetic practices with perceptual psychology. It was not until 1950, when these visionary thinkers finally met in person, that they joined forces to present their discoveries which determined that experiences are momentary intersections between internal and external realities, and are intrinsically intertwined in the deepest levels of consciousness, publicly. Both Drexel and Kükelhaus believed in the value of using the senses as pedagogy and that they should be integrated into every level of education. Correspondence between Drexel and Kükelhaus after 1950 illuminates the theoretical paths and applicative forms generated through the interplay of experimental psychology and applied aesthetic practice. This paper provides insights into the artistic and scientific dynamics based on Drexel’s examination of archetypical imagery and the psychic line, and the sensory development applications designed by Kükelhaus.
This study suggests that student reflection on academic and industry collaborative projects can enhance student’s understanding on the design process to solve live industry problems. It contributes to the body of design literature to support students learning of explicit and implicit knowledge (Boling et al., 2016; Land et al., 2016; Salama, 2015). A 2017 learning- by-making (LBM) unit in the School of Architecture and Design, at the University of Tasmania, Australia, developed a unit for students to collaborate with Neville Smith Forest Products Pty. Ltd. (NSFP). NSFP is a local Tasmanian timber product manufacturer who currently stockpiles out-of-grade timber that has limited market applications. Undergraduate design students from second and third year Furniture, Interior and Architecture degrees collaborated with NSFP to value-add to their out-of-grade resource in the LBM unit. A series of design challenges, observations of industry practice and access to out-of-grade timber from NSFP exposed students to live industry problems and provided them the opportunity to build professional design skills. Students reflected on the collaborative LBM unit in a reflection journal, which was used to provide evidence of their learning experiences. The collaborative environment between academia and industry allowed students to acquire an understanding of timber product manufacturing that helped them develop empathy towards the industry problem and influence the development of new products. This study presents how student reflections influenced a change in their design process as they progressed through sequential design challenges to address an industry problem by adopting Valkenburg and Dorst (1998) reflective learning framework.
Low-seated chairs for tatami mats that are characteristic of Japanese-style interior appeared after late 1940s. This article focuses on the ambivalence between Western lifestyles and Japanese lifestyles by tracing the comments of designers, critics, magazines, and so forth to clarify a background of them. The introduction of chairs in Japan was actually involved, by definition, in a dichotomy between sitting on the floor and in chairs, which therefore was far from the domestic practicality of lifestyles among the public. Then we have to observe the two points for the introduction of chairs to break through this rigid situation: (1) how did the public establish definition of chairs outside the Westernization? This article grasps the fact that the artisans and early designers accumulated their experience of producing chairs from scratch, through trial and error. (2) How did the relation between sitting on the floor and in chairs break out of the dichotomy, through ambivalence? This article focuses on the fact that the public enjoyed the physical relaxation offered by the mix of sitting on the floor and in chairs. This constituted the domestic practicality of chairs for the Japanese. Therefore, such experiences of making and using chairs can be summarized as the awakening of a universe in the distance between the floor and the seat-height of Western chairs. It was a new frontier for Japanese designers, and low-seated chairs were born in this space. This article concludes that it marked the transition from Westernization to Japanese modern design.
The environment in which patients (need to) reside has a great influence on their wellbeing (Ulrich, 1991). That is why introducing ‘Design for Wellbeing’ is key in the design of palliative environments. People in the last phase of their life become more receptive to environmental stimuli. From our perspective, this triggers design to become even more relevant in such contexts. People’s search for subjective well-being (SWB) has promoted a change in vision in the design of new products, services and environments, with a focus not only on material properties, but also on the personal values that trigger actions that can contribute to people’s SWB. Such considerations contribute also to proposing answers to the question of how design can support people to have a meaningful life and ‘be well’ in the best possible way, according to the circumstances.
The purpose of this paper is firstly, if design for wellbeing can be performed in the context of palliative care, and secondly, how research could be set up in such a precious context. A thorough literature review will be performed to answer these questions. The value of this study lies in aiming to try to enable terminally ill patients and people from their immediate surroundings to cope with these events via design, and to stimulate people to be able to perform activities that they like (most) and which contribute to their SWB.
This paper engages with the literature to present different perspectives between forecasting
and foresight in strategic design, while drawing insights derived from futures studies that
can be applied in form of a design-inspired foresight approach for designers and
interdisciplinary innovation teams increasingly called upon to help envisage preferable
futures. Demonstrating this process in applied research, relevant examples are drawn from
a 2016 Financial Services industry futures study to the year 2030. While the financial
services industry exemplifies an ideal case for design-inspired foresight, the aims of this
paper are primarily to establish the peculiarities between traditional forecasting
applications and a design-inspired foresight visioning approach as strategic design
activities for selecting preferable futures. Underlining the contribution of this paper is the
value of design futures thinking as a creative and divergent thought process, which has the
potential to respond to the much broader organizational reforms needed to sustain in
today’s rapidly evolving business environment (Buchanan, 2015; Irmak, 2005; Muratovski,
Traditional Industrial Design sponsored studios (when a corporation partners with a student design studio) can quickly become design for hire studios which limit student learning outcomes as well as successful outcomes for the Sponsor. In assessing instruction practices in sponsored studios, traditionally success is limited to products moving directly into production. By reframing the studio into an incubator and in-line studio setting students could work in the same fashion as an in-house design studio, with mass diminutive ideation focusing on performance initially rather than aesthetics causing an increased standard for success. Because students would be concentrating on editing down a mass amount of variables with swift precision using raw but effective mockups, time would not be wasted on improving the craft of an initial, potentially ill- developed concept, leading to more risk projects with market disrupting potential rather than just an aesthetic or materials update going into production.
In a multi-disciplinary studio setting students from Industrial Design, Apparel Merchandising and Design, and Kinesiology, partnered with a corporate sponsored studio instructed in the framework premised above. The outcomes were a success with the studio functioning beyond a studio for hire scenario to learning objectives being met as well as aspects of projects moving forward into to development and projects moving directly into production as well as applications for patents. This paper investigates how studio culture can be reframed to create a diverse range of success as well as what specific instruction techniques, making techniques, and studio culture lead to this success.