Due to the intuitive controllability and easy to learn the tablet is a very popular nowadays. Many touch gestures are introduced to enhance the convenience usage on the tablet.
However, how these gestures match with the tasks? Are they understood by the “technological alienation” of the elderly users? Is there difference existing between the elderly and younger people? This study aims to answer these questions. Seven basic gestures and their correspondent tasks were selected from top 3 operation systems. Thirty mid-older subjects including 15 expert users and 15 novice tablet users and thirty young subjects were recruited to do matching test. As a result, we found that the correct rate of the mid-older is significantly lower than the young. Experience in using might affect the correct rate. Certain intuitive gestures including Tap, Swipe, Pinch and Rotation had higher correct rate were considered to be acceptable for both mid-older and young subjects according to the ISO standard. However, only the Pinch gesture for novice mid-older is acceptable. The research suggests that more coaching might be needed for novice mid-older adults on the use of gestures.
This paper details the evaluation process undertaken to create criteria for the development of an iPad stand for elderly users. Emphasis is on the requirements elicitation stage with end users in the field. 32 elderly participants taking part in the activity group as part of the Ageing-Well program of a City Council in a cosmopolitan area in Australia were part of an evaluation in which three existing iPad stands were trialled. While commercially available stands are abundant, specific problems such as reduced grip, basic technical understanding of the stand, and concerns surrounding stability were encountered within the group. Observation and semi-structured interviews were undertaken with the cohort to determine factors surrounding the suitability and uptake of these stands by elderly users – most of them with some disabilities - with findings suggesting that current tablet stands require fine levels of dexterity, which may not be appropriate for elderly users where such a device is needed. While usability in setting up the stand and use is a strong factor, aesthetics and material qualities are equally important for enjoyable use. In addition, the use of iPads in social activities between two or more older adults has specific demands in terms of visibility of screen, sturdiness and easy movement that is not considered by current tablet stands. The paper ends with proposing design recommendations. Further research is required to develop a suitable solution and refines these
Design is gaining popularity as a way to address complex social problems in various fields of practices. Strangely, public health which, by nature, is concerned by such kinds of problems, remains foreign to this way of thinking. Building on the increasing popularity of design in policy making, we stress that public health could also benefit from this conceptual yet pragmatic framework. To open a critical perspective about the potential of design for public health, we examine four design projects that address social determinants of health and whose outcomes promotes healthy living habits. Finally, we argue that the interest of design for public health lies on its concern for the users’ æsthetic experience emerging of its encounter with the touchpoints that embody health policies. This contribution ought to act as a stepping stone to open a debate about design as offering a critical perspective for the practice and study of public health.
Increasingly universities are adopting a collaborative approach to ensure research outcomes have industry-relevant impact. This collaboration has known challenges given the complexity of the process which requires successful negotiation across the needs of various stakeholders, disciplinary knowledges and cultural contexts. A co-creation approach in collaborative research can assist in navigating these challenges by empowering all stakeholders including industry, the academy and the community. This paper presents a case study of an industry engaged research project that employed this approach. Partnering with a northern European international airline and universities from Australia and Singapore, the project investigated opportunities for innovation around the ageing population’s user experience with in-flight packaging. Applying case study method, data collected included in-flight observations, expert interviews, co-creation workshops and prototyping. Challenges as well as opportunities are identified around how the co-creation approach supported the industry relevant outcomes of the project. The findings suggest that co-creation supports better outcomes for collaboration across the complexity of industry engaged cross-cultural research projects.
The purpose of this research was to utilize co-design thinking to investigate and understand the experiences of veteran students entering into college at The Ohio State University (OSU) after military service, and to assist the university in improving those transition experiences. The research significance is that an increasing number of post 9/11 era veterans are utilizing the educational benefits earned through their service. Many of these service members have spent years inside a military culture, which has inadequately prepared them for a transition to the civilian and academic environments.
It has been found that veteran students often self-segregate due to age differences, and their experiences gained through military service. Additionally, while OSU’s Office of Military and Veteran Services (OMVS) has been doing incredible things to help veteran students transition away from the military and into OSU, many of their practices tend to promote self-segregation rather than integration.
Although it is not true across the entire population of veteran students, the research conducted showed that many sought opportunities for improved social integration programs. Opportunities lie in finding a balance between the culture that veteran students share, and integration into the civilian culture they are now part of. Additionally, veteran students could benefit from additional support in regards to academics and logistics when navigating through OSU.
The study conducted was comprised of preliminary interviews with a director of the OMVS, an initial survey, four co-design sessions with volunteer veteran students, and an evaluative survey to gain deeper insight into the possible new service concepts generated during the co-design sessions. Based on the research results, proposed new services and improvements to existing ones were presented to OSU’s OMVS.
Learning a new competence and attempting to perform it within an organization not only takes time, but it is heavily influenced by the real-world context of day-to-day work culture and individual perceptions. The little-understood world of learning Human- Centered Design (HCD) within an organization is studied over one year in inside of a group of healthcare organizations through a training and mentoring program called the "Innovation Catalyst Program."
Deep insights and personal narratives are gathered by studying learners and their coaches in real-time observations and conversations. A dynamic story unfolds as those who are learning creative approaches for organizational innovation are coached by those with many years of experience on the topic. These same participants provide feedback on the frameworks generated.
The result of this Longitudinal Grounded Theory field study is a new actionable model for understanding experiences and approaches to learning HCD within the context of an organization, a novel approach to assessing development, and ultimately, a way to empower individuals with the mindsets and skillsets of HCD for real-world challenges.
Motion graphic design is a branch of information visual design.Based on questionnaires and the factor analysis of Statistics,this paper evaluated the hierarchy elements of motion graphic design through the cognitive performance of the three elected types of videos (from 9 selected sample). Furthermore, analysis of the design categories based on users' perspective; the weight ratio of each factor of design details in the cognitive process,and Set up visual data chart.The research is to provide a quantitative evaluation of motion graphic design methods and help to realize the value of cognitive analysis.
We developed an art program that connects rehabilitation exercises with the creation of art. The quality and level of rehabilitation exercise achieved in the outcome of the resulting artwork is reflected as feedback to encourage patients to perform their rehabilitation exercises. The art program is called “Let’s stand up and draw art in the sky!” and utilizes a virtual reality (VR) head-mounted display device to create a landscape image in the device’s display area, through the movements of sitting down and standing up. To replicate the rehabilitation movement of standing then sitting on a chair, a squat exercise experiment was conducted with and without the art program, using university student subjects, and the results were compared between the two trials. When the subjects used the program they reported a significant increase in the "Level of Vitality" and the "Level of Pleasure", compared to when they performed the exercises without the art program.
Commercial products specially designed for the elderly have assumption of user disability and focus on assistive tools design. However, recent studies show aged people gradually stay healthy condition because of modern advanced medical technology and service. There so- called “platinum society” that describes a group of aged people live in a community where they have to take care of themselves under healthy condition. To respond to above situation, this study applies service design model to explore daily life requirement of the elderly and proposes a new transportation assistive device design located aside the bus station. From empathy map analysis, point of view definition, requirement-and-function deployment, to service model construction, real daily life activity and movement of the elderly are collected and analyzed. A participative design approach is applied to involve senior citizen participation that is helpful to retrieve their intangible needs. In this proposed design, it includes an information interface and an exercise assistive device for the elderly to use during the waiting period when they stay at the bus station. It provides required information for transportation purpose as well as simple exercise movement that make it form an area of social connection. Instead of boring waiting time wasted at the station, it enhances interaction between the elderly through uncomplicated stretch movement and conversation. A scaled prototype is implemented to simulate and test the scenario and interview is executed to collect feedback from the elderly. Ongoing progress show a feasible application can be achieved by integrating with current environment.
This paper reviews contemporary communication design practice in Australia through a series of interviews with practitioners, conducted to better understand the place of sustainability in contemporary practice. It is especially concerned with the expectations and experience of designers, and their attitudes towards sustainability in practice, and the contrast between designing ‘greener things’ and establishing more sustainable outcomes for their clients through deeper collaboration. The paper is part of a larger PhD project attempting to establish ways of expanding the understanding of sustainability for communication designers.
It is common to see graphic design copies of foreign models or other Chinese designers. These designers are apathetic toward the work and neglect its ongoing challenges, including the need for constant innovation. In contrast, there are masters who use Chinese culture in creative ways and achieve outstanding reputations all over the world. The reasons design masters choose Chinese culture as a theme for their graphic work and the unique ways in which they symbolise cultural resources and knowledge are explored and explained in this study. This study also illustrates how traditional culture can become a potential innovative strategy by applying a systematic and culture-based methodology. The case studies presented concern the first generation of graphic designers in Hong Kong: Henry Steiner and KAN Tai Keung. The preliminary results of the two case studies show very positive outcomes for cultural interpretation becoming a new innovative stream of graphic design.
The ethical dimensions of basing a typeface on existing faces are unclear. Commentary about “clones” from critics and type designers alike are confused and contradictory. Few writers consider the issues systematically. Misunderstanding of copyright law and unreflective versions of moral rights claims dominate discussion. Open discussion of the models for a type design avoid claims of plagiarism and also affect the reception of the new typeface.
This paper presents a case study analysing the interactions of nine security officers during the mandatory passenger screening process at an Australian international Airport. Eye-tracking glasses were used to observe the visual, physical and verbal interactions of security officers while they performed the x-ray task. Stationary video recording devices were used to record physical and verbal interactions performed by security officers during the load, search and metal detector tasks. Six taxonomic groups were developed that define the different types of interactions performed by security officers during each task. Each taxonomic group is comprised of several discrete interactions specific to each of the tasks observed. Through analysing the composition of interactions and the relationships between interactions in different tasks, this paper highlights the prominence of interactions that security officers perform with passengers and their belongings. These interactions play an important role in the first and last stages of the passenger screening process, as well as influence the functioning of the overall passenger screening process. Due to this, they have substantial effect on passenger experience, throughput efficiency and security efficacy. In response to these findings, we draw from emerging security technologies and persuasive design principles to present potential design solutions for optimising the passenger screening process. These are presented in the context of a preliminary framework with which to inform the design of current and future passenger screening processes.
To prepare students to imagine desirable futures amidst current planetary level challenges, design educators must think and act in new ways. In this paper, we describe a pilot study that illustrates how educators might teach K-12 students and university design students to situate their making within transitional times in a volatile and exponentially changing world. We describe how to best situate students to align design thinking and learning with future foresight. Here we present a pilot test and evaluate how a university-level Dexign Futures course content, approach, and scaffolded instructional materials – can be adapted for use in K-12 Design Learning Challenges. We describe the K-12 design-based learning challenges/experiences developed and implemented by the Design Learning Network (DLN). The Dexign Futures course we describe in this paper is a required course for third year undergraduate students in the School of Design at Carnegie Mellon University. The “x” signifies a different type of design that aligns short-term action with long-term goals. The course integrates design thinking and learning with long-horizon future scenario foresight. Broadly speaking, we ask how might portions of a design course be taught and experienced by teachers and students of two different demographics: within the university (Design Undergraduates) and in K-12 (via DLN). This pilot study is descriptive in nature; in future work, we seek to assess learning outcomes across university and K-12 courses. We believe the approach described is relevant for lifelong learners (e.g., post- graduate-level, career development, transitional adult education).
This article concerns the use of critical design practices within the context of commercial semiotics, arguing that incorporating practices from a critical design approach is valuable for client brands, but also an important means with which to incite brands to consider more deeply their role in shaping the future. As an alternative to the oppositional approach frequently taken by critical design practitioners, working through design practices collaboratively alongside client brands creates potential for the radical changes sought by many of the movement’s vanguard. A case study of recent work with a corporate client demonstrates the practical effects of using critical design practice within a commercial setting, proving the complementarity between critical design practice and commercial semiotics – where the confluence of the thinking brought new value to improve product design for example – and points to the value of using current leading edge thinking within the design community.
Light in photography is considered by most practitioners as one of the most important
visual element since through it the human is able to recognize shapes, texture, color depth and even create diverse moods in the images. In food photography, light settings also imply the creation of several forms of shadows which become a secondary visual
element. Thus, the effects of different types of shadows on food photos can generate
different perceptions of the food creating either a positive or negative impression on
This paper aims to explore the usage of cast shadow on food photography in order to open a new discussion in this topic. The main approach was to create and survey food images with several cast shadow composition; evaluate them and determine if the difference of cast shadows has an impact on how food images are perceived.
As a result, the experiment showed that different cast shadows affect not only the mood in which food is perceived but also the taste of the food. These findings can be useful to
explain how cast shadows are also a key visual element in the decision making process
or human behavior when choosing what to eat from a group of food images.
Increasing interest is seen at the intersection of architecture and health. The built environment has become associated with a number of negative health outcomes including obesity, cancers, and diabetes. Engaging design students in these inquiries surrounding health is integral in preparing them for future practice. This paper reviews the conceptual development and tested implementation of an interdisciplinary course focusing on the wellbeing and overall health of the occupant, using primary and secondary framework structures in the vein of Groat and Wang’s logical argumentation. The reviewed course engages interdisciplinary teams composed of students from the School of Architecture, the College of Engineering, and the College of Natural Resources, with private practice. The course puts forth an effort to break out of the conventional pedagogical structure found in architectural education, primarily the studio and large lecture spaces. The course has been specifically designed to: (1) establish a framework for common content relating to health in the built environment across disciplinary boundaries; (2) build meaningful partnerships between interdisciplinary student groups; and (3) establish a common vocabulary between architectural education and aligned disciplines regarding health and the built environment. The course structure, activities, and assessments are reviewed, proposing a solid framework for including integrated design and themes of health in architectural education.
The design of meaningful graphical objects to represent collection items must balance the following: amount of useful information that can be communicated through the object’s graphical form, meaningful graphical difference between individual items or groups of items, and restraint in form complexity to allow for the simultaneous display of numerous collection items at a small size. How the user interprets difference and sameness and, more importantly, whether the user attaches hierarchical value to the emergent categories, may play a significant role in determining whether that user focusses attention on one set of data over another, on one set of processes over another, and ultimately, on one set of tasks over another. This paper examines the significant consequences for the understanding of the user resulting from representation of data, files, and other objects in a human-computer interface (HCI), and proposes that new approaches may be indicated, given the growing complexity of what is being represented and how what is represented can be used.
As humans’ information processing abilities, have become more and more disconnected from their senses due to an increasing quantity of abstract information, so have design processes. There is a demand for designers to include human sensation as part of engaging product forms and experiences. This qualitative case study explores the role of senses and their potential use in design ideation. A literature review of related theoretical and pragmatic perspectives and a survey of 15-20 product examples that provide unique sensory experiences are analyzed and sorted through four sensory design strategies: Sensory Augmentation, Conversion, Transition and Isolation. Using the four strategies as core concepts, a Sensory Reflective Framework with a mindful focus on sensory appreciation and translation is proposed to support designers’ ideation in creating unique product forms and experiences. The paper reports the process and findings of a sensory ideation workshop which was conducted based on the framework, and further discusses the development and implications of the framework in supporting designers’ sensory ideation.
This research is based on the scenario in the context of Hong Kong, in which church has been built in densely populated urban environment restricted in flat space. The research objectives were: 1) firstly to investigate the relationship between theology and spatial design in Hong Kong Protestant church; 2) secondly, to analyse the issue of the lack of design with respect to sacred identity in the church of Hong Kong that leads to an unappealing and non-sacred appearance of Protestant church; 3) and finally, to establish theoretical standpoints on designing sacred space with contemporary quality without surrendering of the sacred identity. The aims of the research were to understand the influence of secularisation to the rationale of church design and to generate an appropriate identity of church with a theoretical standpoint to serve the contemporary community effectively.
In order to meet these objectives, the study comprised of a qualitative site observations of 171 churches, which provided comparative figures for the study of churches incorporated with design elements or no design elements.
In Hong Kong approximately 775 one-flat churches, which are 66% of the total number of Protestant churches, are located in different layers of vertical space within this vertical city. When churches provide social services in the same limited space, the identity of church is surrendered to the need of the social community.
This study endeavours to facilitate church design with the focus on the immanence quality in order to encounter the different spatial limitations in church design.
This paper presents the results of a research based Living Lab experience, where people participate together as users, researchers, stakeholders and collaborators working to effect change to improve social inclusion and social participation for persons with functional difficulties. The Rehabilitation Living Lab in the Mall (RehabMall) transforms an urban shopping mall into an interdisciplinary, multi-sectorial research platform that supports multiple projects investigating what constitutes an accessible and inclusive environment for people with physical, sensory and cognitive disabilities. We present an overview of the RehabMALL Living Lab, the contexts of the project and the project meta-analysis to present the salient issues emerging from the projects that were done. Grounded in a design research approach, and inspired by the Ecological Systems Theory of Bronfenbrenner (1979), the investigations conducted focus on subjective and inter-subjective experiences within understanding obstacles and facilitators that frame how people experience going to the mall, and how the physical, cognitive and virtual environments that support these activities might be better served. Disability is defined within the framework of the “World Health Organization’s International Classification of Functioning (WHO, 2003). The overview of the project is presented with particular attention to the various collaborations and partnerships created alongside the issues that emerge in terms of results, and how people might be better served when public spaces are designed with their input and within a perspective of universal design.
Contemporary research in business strategy, new product development, and design management has suggested that cross-functional collaboration within team-based environments is critical to successful product development processes. However, scholars have also demonstrated that the mere presence of inter-functional structures does not necessarily lead to better outcomes. Indeed, the very differences which cause cross-disciplinary teams to result in improved design processes may also lead to friction as team members’ backgrounds, orientations, and training often cause them to have different perspectives on what information is important to the product design process and to solve development-related problems. Improved understanding how to integrate information from differing functional areas is a clear emphasis of research, yet very few empirical studies have precisely defined the units of knowledge flowing through NPD projects, differences in importance of information elements by functional area, or the structures which may facilitate the sharing of information within NPD. This study presents an investigation of product design briefs as knowledge-based artifacts of cross-functional collaboration within NPD. Drawing on a proprietary sample of 68 briefs analyzed through an expert rating procedure alongside survey questionnaire of 153 product development managers our results define 51 information elements commonly shared between functional areas during an NPD project. We organize these information elements as eight factors, categorize the “importance” of each element to NPD success, and describe differences in evaluation from across three primary functional domains of NPD: (a) Design, (b) Marketing, and (c) Engineering/ R&D/ Development.
Since the 1800’s, England became an industrialised country and experienced extensive urban growth, so sales associates chose this location to establish large stores. Towards the end of the nineteenth century, the aim was to create the stores to entice customers through space, impressive architecture, interior design and the elegant display of merchandise. At the same time, the display techniques were growing to promote sales. Therefore, more retail equipment manufactured and supplied for displaying products in the stores. This significant variation led the retail industry as that goods could be touched by the customers and they were not accessible only through retail assistant anymore (Whitaker, 2011). Since then due to this new differentiation, retailers have been experiencing a significant change in their customer’s behaviour. Now the retailers are trying to give a brilliant shopping experience to their customers with more reason to increase the sale (Ebster, Garaus 2011). However, there are some restrictions to this strategy that afford excellent opportunities for shoplifters and opportunist criminals. Store design can be a fantastic and efficient tool to increase sales. Also, it could significantly increase the chance of retail crime. This paper examines how to minimise criminal activity in retail environments to reduce loss prevention and retail shrinkage by raising awareness through design thinking. Therefore, interviews, observation and exploration were done based on the experience of employees and customers in ‘The High Street Retailer’. The research project outcome included as over, a creative retail crime learning package and a digital platform to raise awareness and improve communication.
Sketchnoting, if seen as a methodology, exhibits potential for systematic and methodical
research. It provides a framework to communicate visually through simple shapes,
breaking complex forms down into combinations of dots, lines, squares, triangles, and
circles. Situated at the lower end of the visualization spectrum, which ranges from napkin
style sketching to photo-realistic rendering, it has low barriers to putting pen on paper.
In the context of an industrial design graduate course originally introduced as a gateway
to traditional visualization in design, sketchnoting exhibited greater potential to not only
lower the threshold of sketching, but in addition, to foster creative, and in some cases,
even boost design confidence. These anecdotal observations revealed several overarching
opportunities for a larger, cross-disciplinary research, which would begin with exploring
the ability to foster creative confidence through lowering the inhibition threshold to
drawing for designers and non-designers alike. Proceeding to explore the potential of
sketchnoting (due to its dual coding nature) becoming an entry point to employing all
modes of thought processing, deductive, inductive and abductive logic as they pertain to
divergent and convergent thinking. Ideally setting up this framework to be investigated as
a means to improve student engagement and general learning behaviors. The long-term
and underlying goal is to change how people see and solve problems and to diversify
stakeholders involved in the development processes. This paper discusses the underlying
concept as well as the originally observations, closing with the above-mentioned series of
How can design orient people to an expanded sense of future possibility? Design researchers are beginning to recognize design’s potential role not solely in producing products, services and strategies but, instead, in shifting mindsets and behaviors. This shift requires a different view of the design practice, from engaging users to gather insights to be implemented, to that process as the actual material of the design. Borrowing from the framework of practice-oriented design, a first step in these processes is expanding participants’ understanding of future possibilities. In opening future possibilities, one recognizes an expanded range of futures and, ideally, engages in dialog with other people and their range of possibilities. This paper introduces mapping activities that are intended to reframe participants’ perception of possible futures. This study conducted pilot workshops with participants who were downsizing their home and struggling with decisions about their things and spaces. This paper argues that working with people already engaged in life transitions such as downsizing presents a rich opportunity for these futuring methods, as they are already beginning to grapple with designing for possible futures. These methods provide a stake in the ground for future exploration of potential methods to engender mindsets of possibility and engage in trialing methods like living labs.
In this paper, we present results from a collaborative research between academic institutions and industry partners in the UK, which aimed to understand the experience of rail passengers and to identify how the design of technology can improve this experience. Travelling by train can often provide passengers with negative experiences. New technologies give the opportunity to design new interactions that support the creation of positive experiences, but the design should be based on solid understanding of user and their needs. We conducted in-depth, face-to-face semi-structured interviews and used additional questionnaires given to passengers on board of trains to collect the data presented on this paper. A customer journey map was produced to illustrate the passengers’ experiences at diverse touchpoints with the rail system. The positive and negative aspects of each touchpoint are plotted over the course of a ‘typical’ journey, followed by the explanations for these ratings. Results indicate how the design of technological innovations can enhance the passenger experience, especially at the problematic touchpoints, e.g. when collecting tickets, navigating to the platform, boarding the train and finding a seat. We finalise this paper pointing towards requirements for future technological innovations to improve the passenger experience.
This paper reports on the development of a mindful interdisciplinary design methodology in the context of the MinD project research into designing for and with people with dementia, which takes the particular focus on supporting the subjective well-being and self-empowerment of people with early to mid stage dementia in social context.
Existing research is for the most part focussed on functional support and safe-keeping from the perspective of the carer. References to decision-making and empowerment are predominantly related to action planning for dementia care or advance care planning. References to care and social interaction show that caregivers tend to take a deficit-oriented perspective, and occupation of people with dementia is often associated with doing ‘something’ with little focus on the meaningfulness of the activity. Furthermore, caregivers and people with dementia tend to differ in their perspectives, e.g. on assistive devices, which might offer support.
The MinD project, has therefore developed an interdisciplinary co-design methodology in which the voices to people with dementia contribute to better understanding and developing mindful design solutions that support people with dementia with regard to their the subjective well-being and self-empowerment a well as meaningful and equitable social engagement.
This paper discussed the design methodological framework and methods developed for the data collection and design development phases of the project, and their rationale. It thus makes a contribution to interdisciplinary methodologies in the area of design for health.
This paper demonstrates how Goffman’s frame analysis is applied in a research on designers’ experience with Cloud based digital tools. At the base of Goffman’s structure is the ‘primary frame’ - in this case designers’ experience with computer based digital tools. These tools’ transition to the Cloud initiated by businesses are called ‘fabrications’. Goffman’s ‘structural issues in fabrication’ such as ‘retransformations’ and the ‘nature of recontainment’ are also discussed through contemporary examples. These fabrications are used or ‘keyed’ by ‘active agents’ from various design fields. The data collected showed different levels of understanding of Cloud technology and the application of various tools in everyday design practices. Thus, the interviewees were clustered into three groups - designers, developers and artists. Their experiences form the creative, technology and experimental frame derived from keying of the primary frame. Design researchers can selectively borrow elements from frame analysis’ complex structure to build an effective user experience narrative.
While it is common for landscaped and well-marked urban streets to have sufficient identification signs, which display place or street names, they often face issues regarding the provision of information (e.g., in sign placement) and inadequate orientation signs, which play an indispensable role in facilitating pedestrian movement. Insufficient signage can be partially addressed by supplementing signs with non-informational urban elements, such as streetlights or other urban features that provide different sorts of information. In order to result in smooth urban pedestrian movement, public signage systems require a balance between districts and streets and a system for presenting linked information. This study proposes that an urban element design system can be applied to the construction of public signage systems for pedestrians. There are several methods by which to accomplish this; each fulfills the needs of different districts and streets. For example, some strategies suggest ways to integrate information in areas with many urban elements, such as public signage, while others offer strategies for adding pedestrian signs and other elements alongside vehicular signs in areas with insufficient information. This article proposes a distribution graph of public signage as a concrete method for organizing the construction of public signage. Such a distribution graph is a way to visualize different distributions of sign type, and see clusters of street patterns. It is an effective way not only to planning new pedestrian signage systems, but also for revising plans with biased or insufficient signage distribution.
We analyze life in urban district on the outskirts of Tokyo by ANT. This research is used to identify social and technological elements that are regarded as essential in the modern day and to develop methods that will link to a practical approach. Our presentation describes these methods in detail. We believe that it may be possible to identify particularly important elements in design methods that respond to the complications of the modern day in early modern wisdom and customs, which until now have been overlooked. Today, as the foundations of social norms and traditions that have previously been regarded as self-evident are swaying and the risk society is advancing, these new design methods can be used to respond to an array of issues with a high degree of complication, such as the deterioration of the mental environment and environmental problems without any discernible solution. Since the modern era began, design has solved social problems through the development of objects and systems. However, in terms of the problems stated above, it can also be pointed out that design is both unable to suggest basic solutions and, in addition, forms a part of the social structures that cause these problems. Approaches that follow laws of causality tied to modern methodology cannot be applied to complicated problems where the relationship between cause and effect is unclear. The use of new design methods makes it possible to decipher complicated relationships and apply pre-modern systems to modern life.
The challenges facing many small nonprofit organizations are increasing at a greater rate than the internal capacities of many within this sector are able to address effectively. This situation has small nonprofits questioning their sustainability and ability to deliver their services in the long term. Often these small nonprofit organizations are working within a business model and communications paradigm that has remained unchanged for decades and one which is proving no longer effective in attracting awareness, engagement, and support. Many of these organizations are facing a critical failure requiring significant business model innovation to achieve both their short-, mid- and long-term goals. Design thinking is an avenue for nonprofits to achieve business model innovation by developing new, unique concepts supporting an organization’s viability and the processes for bringing those concepts to fruition. This case study outlines the design thinking process applied to business model innovation for a small, 22-year old, nonprofit approaching critical business failure.
Outside of academia, it is often hard for researchers to find the opportunity to continue our scholarship. As graduate students and PHD fellows, we spent years creating and testing our hypotheses, designing new methods, approaches and technologies and we are anxious to ascertain if our theories can survive in the real world.
How does a lone researcher engage the business community and convince them to test and use new cutting-edge research methods? The flipside is also true, you are a corporate researcher who would like to engage new methods and approaches to advance learnings, but you have limited resources and a business that demands results. How can you trust new methods and engage in new approaches while minimizing risk and exposure? The authors will give a 50,000-foot view of a new design research methodology, The FlashDraw, and how it can be complimentary alongside traditional research methods. An overview and example of the research process will be illustrated. The poster will also explore the challenges and successes of the partnership between two researchers, a recent graduate student and a corporate researcher, and their on-going journey to explore and establish best practices for researching on the “edge of the new”.
In this study, based on the perception of older adults, fuzzy positioning of healthcare wearables and impacts of differentiated product positioning on human considerations and design communication strategies are studied. Empirical researches are performed by adopting both quantitative research (248 questionnaires for clustering and regression analysis) and qualitative research (15 cases for in- depth interview). The perceptions of older adults on product positioning are divided into three types: Tech-Aid, Fash-Acc, and Fash-Tech. Results indicate that the influential human considerations for each positioning were different from each other. Through coding and storyline analysis, diverse communication strategies are found for each positioning. The outcomes for each type are as follows. For Tech-Aid, wherein older adults lay emphasis on usefulness, ease of use, and privacy, the designers can adopt a calm communication strategy by giving priority to older adults’ control power, fitting symptoms, user-friendly, and cautious interconnection. For Fash-Acc, wherein older adults focus on personal image, aesthetic appearance, and ease of use, an active communication strategy for modeling a style for elderly fashion that agrees with aesthetic appreciation and simplified operation can be adopted. For Fash-Tech, wherein older adults require to integrate usefulness, ease of use, aesthetic appearance, comfort, privacy, and self-image, a persuasive communication strategy can be used, through which designers can offer older adults more data insights and entertainment, along with data association, and in the meantime, reduce data interferences and pay attention to style modality and appropriate display with context fusion and contact comfort.
Design is essential in product development but several small and medium-sized enterprises (SMEs) relatively capable of manufacturing are suffered from lack of in-house design ability. For new product design, these SMEs typically employ external designers. In this clientdesigner interaction, designers propose design solution alternatives to their clients, which clients may accept or reject. In some cases, clients provide designers further design requirements. A study on how interactions are performed and what effects these interactions have on the results of product development is essential to determine what is needed to achieve successful collaborative relationships. Thus, this study analyzed three design development cases that were previously performed to understand how interactions work between clients and designers and its effect on the outcomes. In all cases, the design team developed designs for the clients based on their technological requirements. This study focused on the effect of client stance on the process and deliverables. Clients usually take various actions that accept or reject design solutions or give additional demands. This is because clients take initiative in decision making. Clients' stance was divided into receptive and expressive stances. As a result, a receptive stance ensured the design capabilities of design consultants, whereas expressive stance confined design capabilities to some extent but a new design direction may be proposed based on a client's knowledge, information, and judgment.
Despite the increased popularity of online tools for remote teamwork and meetings, moderated collaborative activities between multiple users in early conceptual design stages, such as brainstorming sessions, are yet not well supported. In this paper, we introduce All4One, a networked system that enables multiple remote users to participate in a moderated visual sketching session. Each participant can independently draw and share sketches using a tablet, and a moderator uses a set of tangible tools to arrange and manipulate sketches that are displayed in real-time on a whiteboard. We present our prototype in detail and the results from a workshop study simulating a brainstorming session with designers who tested the system in practice. Results show several usage patterns and the potential of All4One for use in early design stages, and the importance of the role of the moderator as the facilitator of the design process. The paper concludes by identifying weaknesses and strengths of the current system and possible directions for future work.
Flexible interaction technology became a one of key technology in nowadays. On the other hand, there are relatively little works has been done to understand how it should be designed especially for feedback of it. In this study, we investigate the guidelines for design feedback to flexible interaction systems through based on user’s expectation on them. We conducted user participated design workshop to collect user’s perspectives about feedback when they use flexible interactions. We gave 8 sets of actions which are generally used in flexible interaction and let 6 participants to generated ideas about visual, sound, and haptic feedback of them. From discussion session in the design workshop, we found out key factors about feedbacks. As a result of design workshop, we build guidelines of designing feedbacks for flexible interactions. This result will lead system designers to build flexible interaction to create flexible interaction which can improve the user experience.
This paper presents the main process of a graduate course entitled ‘Generative Design Research for Sustainability’ offered in the Department of Industrial Design at Middle East Technical University in the spring semester of 2015/2016 through exemplary design research cases conducted by the graduate students at the doctoral level. These cases focus on the adaptation of the generative tool and the method, namely Experience Chart (EC) Guide tool (Kulaksız, 2016) and Experience Reflection Modelling (ERM) method (Turhan, 2013), in line with the graduate students’ particular research topics. First, the paper provides the course objectives, outcomes and process, then, it explains the EC Guide tool and the ERM method to be adapted and implemented within the context of the course. Then, these generative tool and method, and their adaptations are demonstrated through the exemplary cases (i.e. efficient use of working environment in design studios, lighting practices in kitchen environment, and interactive prototyping practice) selected from the submitted assignments considering their quality, originality and comprehensiveness. The main emphasis of this paper is on the adaptation and implementation of the EC Guide tool and the ERM method through providing the experiences, insights and suggestions of the graduate students who are also the co-authors of the paper. Based on that review, major conclusions and findings are presented through comparing and contrasting these cases for the future development of the course.
This research aims to investigate how Korean digital agencies practice design thinking for their website innovation. Based on a literature review on the design- thinking-driven web development process, multiple case studies of award-winning website projects were undertook. Through analyses of these cases, the following challenges and lessons were disclosed: (1) challenges – building a long-term, playful partnership with clients, leveraging decision-making executives’ design thinking awareness, and coping with limited resources (design thinking practitioners, budgets, and schedules) and (2) lessons – cross-functional collaboration, agile mobile-first development process, powerful visual storytelling, and compelling UX strategies and UI guidelines. Moreover, distinct approaches of design thinking practices were identified according to two website types: a brand promotion website – killer branding content-driven approach, and a service channel website – better UI/UXdriven approach.
The more society gets complicated and developed, the more demand for various products. As a result, we are living in a flood of various products. However, considering how people consume and use products in their daily life, it is not difficult to find people transforming, changing the original purpose or adding value to existing products instead of buying new ones. This phenomenon has been defined as everyday design. In a sense that everyday design provides a better understanding of actual uses in real context, it deserves to be studied. Therefore, this paper attempts to figure out an underlying mechanism of everyday design. For this, a conceptual framework was developed, whose focus was on what triggers everyday design, what goals are set, and how a product is transformed. The conceptual framework was validated with a photographic inventory of users’ everyday design in our daily life. The conceptual framework could provide a better understanding of everyday design in a systematic way. If it is considered in the product development process, it could contribute to an increase of use satisfaction as well as sustainable design. The limitations and a further study are discussed at the end of the paper.
Over the last two decades, for-profit and non-for-profit organizations have increasingly adopted open collaboration, such as open innovation and crowdsourcing, as a strategy for innovation. Information and communication technology (ICT) has played a major role in forming open collaboration communities, but organizational design also needs to be considered to encourage the active participation and collaboration of actors. Nonetheless, organizational design aspect has seldom been addressed in developing open collaboration platforms. In this research, an organizational design framework for open collaboration was developed through a nature-inspired design approach. This framework suggests that the self-organization mechanism of social insects provides inspirations for the design of the platform, especially in terms of setting simple rules to induce behaviors of the actors and facilitating interactions among them. Since the open collaboration strategy depends on external actors who are not in employment relationship, an organization cannot force their contribution. Accordingly, the organization’s capability to induce the spontaneous participation of actors is essential, and it implies the potential role of designers in platform design based on a thorough understanding of actors. We thus claim that designers can bring a new perspective to organizational design. Open collaboration platforms serve as an exemplar in which designers contribute to the design of an organizational environment that fosters collaboration.
Today, while profit maximization is still the bedrock of the capitalist model, people have embraced the idea of social contribution as a useful strategy in businesses. In this recent movement, Creating Shared Value (CSV) strives for a win-win solution that creates both social and business value. While in its early stage, CSV is showing promise and potential; society is witnessing a paradigm shift from practices of corporate social responsibilities (CSR) to CSV which is more sustainable and effective approach. Since Porter and Kramer originally introduced the concept in 2011, CSV’s application has expanded to many areas of business management, but it has not been discussed comprehensively in design research as of yet.
The title of this paper, “Designerly Way of Creating Shared Value” (DCSV) is inspired by Nigel Cross’s famous book, Designerly Way of Knowing (2006). ‘Designerly’ is an adjective describing ‘how’ designers think and behave that is different from professionals in scientific disciplines. The aim of this paper is to propose a new matrix illustrating the link between creating shared value and design, and to systemically describe the existing examples of DCSV (Cross, 2016). The paper will begin with an introduction to the concept of CSV followed by a brief literature review on CSV in design research. The second part will focus on demonstrating the new DCSV matrix by illustrating the four examples that exemplify it.
There is a growing need for sustainable fashion since the 2010s. As artists and designers explore the potential use of innovative materials developed by synthetic biology and DIY bio-hacking (Myers, 2010), recent practice-led research in fashion design aims at building the better relationship between ecological sustainability and biotechnology to cope with the limited resources available on the earth (Fletcher, 2008). Based on this issue on the material sustainability, this practice-led research analyzes the current production processes of the fashion industry to propose possible solutions by incorporating emerging biotechnology and fashion design in the context of sustainable design. As the methodology, the authors adopt two processes to make bio-garment. First, the experiment of DIY bio has been conducted for culturing ecological bio-material SCOBY (symbiotic colony of bacteria and yeast) that produces bacterial cellulose. The material has similar properties to leather. Second, designing the garment through 3D modeling has been tackled because we aim to make the bio-materials grow onto a 3D printed mold as ‘zero waste method’ (Rissanen; Mcquillan, 2016) , which can eliminate textile waste at the design stage. By the application of biological materials in the process of dressmaking, this practice led research has been analyzing the production line of the fashion industry and trying to propose sustainable solutions. Also the research aims to combine emerging biotechnology and sustainable fashion in order to establish the design process as an alternative design process to the polluting industry.
In recent years, architecture culture study is a popular direction in traditional vernacular dwelling research of China. Architectural culture, as the metaphysical part of a building, not only influences the formation of the building in design period, but also dominates the usepattern of the building after construction. However most of studies started with material form of dwelling from architectonic prospective ignored that architecture is a phenomenon of culture. The study of vernacular dwelling from cultural and other related academic fields is very necessary. Bei-nong is a transportation space in traditional vernacular dwelling of Jiangnan area in China. This paper tried to use the methods of urban history research to investigate this space. First of all, the particular time and region of bei-nong appearance has been observed and defined from historical and cultural background. Then, appearance reasons have been analyzed based on the social context and mainstream philosophy during the scope of time and region. In the end, the physical and social functions and the architecture construction of bei-nong have been summarized and ratiocinated from the former conclusions according to inductive reasoning theory. A real and comprehensive bei-nong is showed in the result of research, not only the physical form and history of architecture but also a history story about that place and time.
Case studies are discussed, from Northumbria University’s practice-led Centre for Design Research (CfDR) that demonstrate how visualising concepts and designs through digital animation can enable effective communication of ideas and interactions, which in turn enables creative leaps in thinking, understanding and decision-making. Animation is a tool that can unlock the comprehension into what is and what could be. This paper reflects on a number of collaborative projects between the CfDR and several scientific communities, demonstrating and focusing in particular on the process of visualisation, designing digital animations to communicate complex processes, ideas and interactions. An approach and understanding has been developed about how to effectively communicate potentially complex, scientific and technical concepts for the benefit of the client and the end user, in particular the lay audience whose knowledge of the subject may be limited or non-existing.
Findings indicate that the process of constructing simple digital animated stories becomes a learning process for both designer and client. Critical discussions during collaborative meetings develop shared understandings: helping clients to think more creatively about communication (appreciating the benefits of manipulating a truth to position to waylay contextual confusion), and making implicit knowledge belonging to the client explicit to the designer. It is important to state that this negotiation is more effective when the designer is a layperson with respect to the complex implicit knowledge of the client. During these collaborative conditions the untangling of complex ideas have achieve the a-ha moments in the animations’ audiences.
How can students at a federally-designated Hispanic-serving institution understand and express culture and diversity through art and design? In order to address this inquiry and to exemplify a method that introduces students to critical thinking in the context of design, I am presenting a case study based on the primary results of a project implemented at an introductory graphic design class, which is part of a multidisciplinary arts program. In this project, students learn basics of design research and auto ethnography in a studio setting, in order to explore heritage and culture, their context of living, family history, and personal connections with their past, present, and future. Results from this discovery stage inform brainstorming, sketching, design, and production of a book that contains multiple visual explorations on “Heritage.” Some of the most memorable and productive conversations and interactions between students took place not only during the development of the project, but at the final project presentation, which exposed their capacity to develop greater tolerance and a more empathic view of the other, to be open to reanalyze their context and personal interactions, to better evaluate the design abilities of their peers as they respond to their own individual approach to the topic, and to develop a better and safer sense of place in the classroom.
Design education opportunities for non-designers are abundant and growing, many offered as rapid sprints through executive education style workshops or online courses. While these quick immersions may serve to infuse design thinking into the work processes of other disciplines, there is a risk of oversimplification. How can courses impart an appropriate sense of design without minimizing its complexity? What are the essential components of design, and optimal timing and formats needed for meaningful delivery? On the other hand, how can we educate those who seek a robust design complement to their existing professions, and those seeking a full transition of their careers into design practice? This study looks at the inception and early iterations of a one-year degree program providing an in-depth education to non-designers seeking a complementary education to other credentials or a full conversion to design through modular degree options. The first years of the program suggest several findings. For example, interdisciplinary cohorts introduce a mix of rational and intuitive approaches. Students need mentorship into design processes and practices, such as subjectivity in assessments and feedback through critique. Educators are challenged to acknowledge the past education and professional backgrounds of students, capitalizing on their unique strengths rather than homogenizing all students into a singular version of design. Students need tools to assess their professional identity during their transition to design. This work in progress will examine the spectrum of design education opportunities for non-designers, including key factors differentiating a degree program from the proliferation of short course exposures.
The number of migrant workers in South Korea is on the rise, but their inadequate Korean language skills prevent them from being promoted at work, or fairly treated as respected members of the society. In this study, in collaboration with a government-authorized language educational facility for immigrants, the authors investigated (a) challenges in migrant workers’ Korean as a second language learning, and (b) design principles of lessons and learning materials specifically targeted to their needs. Student and teacher interview data confirmed that the workers’ limited time for study, weak motivation, Korean colleagues’ indifferent attitude, and limited teaching resources at educational facilities are major barriers to achieving higher levels of linguistic skills. From the data, the authors identified four design principles: personalized content, community participation, portability of materials, and micro learning modules. Informal lessons via Facebook, factory safety signs, and portable writing drill booklets are designed as on-going experimentations of the principles.
Student life at a large institution like University of California, Berkeley, is challenging in many ways. Along with the often extreme academic demands, students must discover and navigate numerous services while simultaneously integrating themselves into formal and informal campus communities. Historically, core student services were delivered in a piecemeal and disjointed way via a dozen or more websites. A large investment in a Student Information Systems (SIS) replacement project has since unified these service experiences through CalCentral, a Berkeley-developed service portal, and created with a significant focus on user experience design.
While significant strides have been made to improve and simplify how services are delivered to students, the design team has been challenged to push their vision of the service ecosystem further, to “humanize the institution.” The vision goes through the SIS project and beyond, by first switching mindsets from service producers to service providers, and second by looking at how deeper relationships can be created digitally between students and the institution. The research, with students and different stakeholder groups, shows that beyond usability and learnability, there are greater opportunities through service design to contribute to students’ senses of agency, inclusion, connectedness and wellbeing. The design team is codifying new design principles and developing prototype experiences that look more closely at tone, behavior and contributing to a positive emotional state of mind. The service delivery through CalCentral is humanized and augmented in affirming ways, to use language that is accessible, and to guide students through complex paths.