The ethical dimensions of basing a typeface on existing faces are unclear. Commentary about “clones” from critics and type designers alike are confused and contradictory. Few writers consider the issues systematically. Misunderstanding of copyright law and unreflective versions of moral rights claims dominate discussion. Open discussion of the models for a type design avoid claims of plagiarism and also affect the reception of the new typeface.
Increasing interest is seen at the intersection of architecture and health. The built environment has become associated with a number of negative health outcomes including obesity, cancers, and diabetes. Engaging design students in these inquiries surrounding health is integral in preparing them for future practice. This paper reviews the conceptual development and tested implementation of an interdisciplinary course focusing on the wellbeing and overall health of the occupant, using primary and secondary framework structures in the vein of Groat and Wang’s logical argumentation. The reviewed course engages interdisciplinary teams composed of students from the School of Architecture, the College of Engineering, and the College of Natural Resources, with private practice. The course puts forth an effort to break out of the conventional pedagogical structure found in architectural education, primarily the studio and large lecture spaces. The course has been specifically designed to: (1) establish a framework for common content relating to health in the built environment across disciplinary boundaries; (2) build meaningful partnerships between interdisciplinary student groups; and (3) establish a common vocabulary between architectural education and aligned disciplines regarding health and the built environment. The course structure, activities, and assessments are reviewed, proposing a solid framework for including integrated design and themes of health in architectural education.
This paper demonstrates how Goffman’s frame analysis is applied in a research on designers’ experience with Cloud based digital tools. At the base of Goffman’s structure is the ‘primary frame’ - in this case designers’ experience with computer based digital tools. These tools’ transition to the Cloud initiated by businesses are called ‘fabrications’. Goffman’s ‘structural issues in fabrication’ such as ‘retransformations’ and the ‘nature of recontainment’ are also discussed through contemporary examples. These fabrications are used or ‘keyed’ by ‘active agents’ from various design fields. The data collected showed different levels of understanding of Cloud technology and the application of various tools in everyday design practices. Thus, the interviewees were clustered into three groups - designers, developers and artists. Their experiences form the creative, technology and experimental frame derived from keying of the primary frame. Design researchers can selectively borrow elements from frame analysis’ complex structure to build an effective user experience narrative.
Flexible interaction technology became a one of key technology in nowadays. On the other hand, there are relatively little works has been done to understand how it should be designed especially for feedback of it. In this study, we investigate the guidelines for design feedback to flexible interaction systems through based on user’s expectation on them. We conducted user participated design workshop to collect user’s perspectives about feedback when they use flexible interactions. We gave 8 sets of actions which are generally used in flexible interaction and let 6 participants to generated ideas about visual, sound, and haptic feedback of them. From discussion session in the design workshop, we found out key factors about feedbacks. As a result of design workshop, we build guidelines of designing feedbacks for flexible interactions. This result will lead system designers to build flexible interaction to create flexible interaction which can improve the user experience.
The design of meaningful graphical objects to represent collection items must balance the following: amount of useful information that can be communicated through the object’s graphical form, meaningful graphical difference between individual items or groups of items, and restraint in form complexity to allow for the simultaneous display of numerous collection items at a small size. How the user interprets difference and sameness and, more importantly, whether the user attaches hierarchical value to the emergent categories, may play a significant role in determining whether that user focusses attention on one set of data over another, on one set of processes over another, and ultimately, on one set of tasks over another. This paper examines the significant consequences for the understanding of the user resulting from representation of data, files, and other objects in a human-computer interface (HCI), and proposes that new approaches may be indicated, given the growing complexity of what is being represented and how what is represented can be used.
In this paper, we present results from a collaborative research between academic institutions and industry partners in the UK, which aimed to understand the experience of rail passengers and to identify how the design of technology can improve this experience. Travelling by train can often provide passengers with negative experiences. New technologies give the opportunity to design new interactions that support the creation of positive experiences, but the design should be based on solid understanding of user and their needs. We conducted in-depth, face-to-face semi-structured interviews and used additional questionnaires given to passengers on board of trains to collect the data presented on this paper. A customer journey map was produced to illustrate the passengers’ experiences at diverse touchpoints with the rail system. The positive and negative aspects of each touchpoint are plotted over the course of a ‘typical’ journey, followed by the explanations for these ratings. Results indicate how the design of technological innovations can enhance the passenger experience, especially at the problematic touchpoints, e.g. when collecting tickets, navigating to the platform, boarding the train and finding a seat. We finalise this paper pointing towards requirements for future technological innovations to improve the passenger experience.
The more society gets complicated and developed, the more demand for various products. As a result, we are living in a flood of various products. However, considering how people consume and use products in their daily life, it is not difficult to find people transforming, changing the original purpose or adding value to existing products instead of buying new ones. This phenomenon has been defined as everyday design. In a sense that everyday design provides a better understanding of actual uses in real context, it deserves to be studied. Therefore, this paper attempts to figure out an underlying mechanism of everyday design. For this, a conceptual framework was developed, whose focus was on what triggers everyday design, what goals are set, and how a product is transformed. The conceptual framework was validated with a photographic inventory of users’ everyday design in our daily life. The conceptual framework could provide a better understanding of everyday design in a systematic way. If it is considered in the product development process, it could contribute to an increase of use satisfaction as well as sustainable design. The limitations and a further study are discussed at the end of the paper.
From the 1980s, design thinking has emerged in companies as a method for practical and creative problem solving, based on designers’ way of thinking, integrated into a rational and iterative model to accompany the process. In companies, design thinking helped valuing creative teamwork, though not necessarily professional designers’ expertise. By pointing out two blind spots in design thinking models, as currently understood and implemented, this paper aims at shedding light on two rarely described traits of designers’ self. The first relies in problem framing, a breaking point that deeply escapes determinism. The second blind spot questions the post project process. We thus seek to portray designers’ singularity, in order to stimulate critical reflection and encourage the opening-up to design culture. Companies and organizations willing to make the most of designers’ expertise would gain acknowledging their critical heteronomy to foster innovation based on strong and disruptive visions, beyond an out-of-date problem solving approach to design.
Commercial products specially designed for the elderly have assumption of user disability and focus on assistive tools design. However, recent studies show aged people gradually stay healthy condition because of modern advanced medical technology and service. There so- called “platinum society” that describes a group of aged people live in a community where they have to take care of themselves under healthy condition. To respond to above situation, this study applies service design model to explore daily life requirement of the elderly and proposes a new transportation assistive device design located aside the bus station. From empathy map analysis, point of view definition, requirement-and-function deployment, to service model construction, real daily life activity and movement of the elderly are collected and analyzed. A participative design approach is applied to involve senior citizen participation that is helpful to retrieve their intangible needs. In this proposed design, it includes an information interface and an exercise assistive device for the elderly to use during the waiting period when they stay at the bus station. It provides required information for transportation purpose as well as simple exercise movement that make it form an area of social connection. Instead of boring waiting time wasted at the station, it enhances interaction between the elderly through uncomplicated stretch movement and conversation. A scaled prototype is implemented to simulate and test the scenario and interview is executed to collect feedback from the elderly. Ongoing progress show a feasible application can be achieved by integrating with current environment.
This paper presents a case study analysing the interactions of nine security officers during the mandatory passenger screening process at an Australian international Airport. Eye-tracking glasses were used to observe the visual, physical and verbal interactions of security officers while they performed the x-ray task. Stationary video recording devices were used to record physical and verbal interactions performed by security officers during the load, search and metal detector tasks. Six taxonomic groups were developed that define the different types of interactions performed by security officers during each task. Each taxonomic group is comprised of several discrete interactions specific to each of the tasks observed. Through analysing the composition of interactions and the relationships between interactions in different tasks, this paper highlights the prominence of interactions that security officers perform with passengers and their belongings. These interactions play an important role in the first and last stages of the passenger screening process, as well as influence the functioning of the overall passenger screening process. Due to this, they have substantial effect on passenger experience, throughput efficiency and security efficacy. In response to these findings, we draw from emerging security technologies and persuasive design principles to present potential design solutions for optimising the passenger screening process. These are presented in the context of a preliminary framework with which to inform the design of current and future passenger screening processes.