Traditional Industrial Design sponsored studios (when a corporation partners with a student design studio) can quickly become design for hire studios which limit student learning outcomes as well as successful outcomes for the Sponsor. In assessing instruction practices in sponsored studios, traditionally success is limited to products moving directly into production. By reframing the studio into an incubator and in-line studio setting students could work in the same fashion as an in-house design studio, with mass diminutive ideation focusing on performance initially rather than aesthetics causing an increased standard for success. Because students would be concentrating on editing down a mass amount of variables with swift precision using raw but effective mockups, time would not be wasted on improving the craft of an initial, potentially ill- developed concept, leading to more risk projects with market disrupting potential rather than just an aesthetic or materials update going into production.
In a multi-disciplinary studio setting students from Industrial Design, Apparel Merchandising and Design, and Kinesiology, partnered with a corporate sponsored studio instructed in the framework premised above. The outcomes were a success with the studio functioning beyond a studio for hire scenario to learning objectives being met as well as aspects of projects moving forward into to development and projects moving directly into production as well as applications for patents. This paper investigates how studio culture can be reframed to create a diverse range of success as well as what specific instruction techniques, making techniques, and studio culture lead to this success.
This paper engages with the literature to present different perspectives between forecasting
and foresight in strategic design, while drawing insights derived from futures studies that
can be applied in form of a design-inspired foresight approach for designers and
interdisciplinary innovation teams increasingly called upon to help envisage preferable
futures. Demonstrating this process in applied research, relevant examples are drawn from
a 2016 Financial Services industry futures study to the year 2030. While the financial
services industry exemplifies an ideal case for design-inspired foresight, the aims of this
paper are primarily to establish the peculiarities between traditional forecasting
applications and a design-inspired foresight visioning approach as strategic design
activities for selecting preferable futures. Underlining the contribution of this paper is the
value of design futures thinking as a creative and divergent thought process, which has the
potential to respond to the much broader organizational reforms needed to sustain in
today’s rapidly evolving business environment (Buchanan, 2015; Irmak, 2005; Muratovski,
The deterioration of linguistic abilities is a natural phenomenon along with aging. Therefore, various assessment tools have been developed to measure linguistic abilities of seniors and diagnose degenerative diseases such as dementia. Although most of the tools are composed of images, there are not many studies focusing on the visual design, which could significantly affect performance of the subject. In this regard, this research aims to suggest a design guideline for linguistic ability assessment tools concerning the key characteristics of the elderly, focusing on visual contents and interface.
Existing related researches were mostly conducted in English-speaking countries. In order to assess the language processing abilities of Korean-speaking elders more accurately, it is necessary to develop language processing assessment tools that reflect the unique linguistic features and structure of the Korean language. Regarding the existing tools, there is a lack of research on aging, focusing
on ‘verb naming.
In the literature review section, the paper investigated the physical, cognitive and emotional characteristics of the elderly and extracted the key elements to consider when designing for the elderly. Also, design principles were found based on case studies and problem analysis of the existing assessment tools for language processing abilities. Lastly, we created a prototype model using ‘verb naming.’ Using the model, we have conducted an experiment and comparative analysis between different age groups to verify the validity of contents.
In conclusion, we provided a design guideline for visual contents and interface of linguistic assessment tools, focusing on elderly users.
The environment in which patients (need to) reside has a great influence on their wellbeing (Ulrich, 1991). That is why introducing ‘Design for Wellbeing’ is key in the design of palliative environments. People in the last phase of their life become more receptive to environmental stimuli. From our perspective, this triggers design to become even more relevant in such contexts. People’s search for subjective well-being (SWB) has promoted a change in vision in the design of new products, services and environments, with a focus not only on material properties, but also on the personal values that trigger actions that can contribute to people’s SWB. Such considerations contribute also to proposing answers to the question of how design can support people to have a meaningful life and ‘be well’ in the best possible way, according to the circumstances.
The purpose of this paper is firstly, if design for wellbeing can be performed in the context of palliative care, and secondly, how research could be set up in such a precious context. A thorough literature review will be performed to answer these questions. The value of this study lies in aiming to try to enable terminally ill patients and people from their immediate surroundings to cope with these events via design, and to stimulate people to be able to perform activities that they like (most) and which contribute to their SWB.
Low-seated chairs for tatami mats that are characteristic of Japanese-style interior appeared after late 1940s. This article focuses on the ambivalence between Western lifestyles and Japanese lifestyles by tracing the comments of designers, critics, magazines, and so forth to clarify a background of them. The introduction of chairs in Japan was actually involved, by definition, in a dichotomy between sitting on the floor and in chairs, which therefore was far from the domestic practicality of lifestyles among the public. Then we have to observe the two points for the introduction of chairs to break through this rigid situation: (1) how did the public establish definition of chairs outside the Westernization? This article grasps the fact that the artisans and early designers accumulated their experience of producing chairs from scratch, through trial and error. (2) How did the relation between sitting on the floor and in chairs break out of the dichotomy, through ambivalence? This article focuses on the fact that the public enjoyed the physical relaxation offered by the mix of sitting on the floor and in chairs. This constituted the domestic practicality of chairs for the Japanese. Therefore, such experiences of making and using chairs can be summarized as the awakening of a universe in the distance between the floor and the seat-height of Western chairs. It was a new frontier for Japanese designers, and low-seated chairs were born in this space. This article concludes that it marked the transition from Westernization to Japanese modern design.
This study suggests that student reflection on academic and industry collaborative projects can enhance student’s understanding on the design process to solve live industry problems. It contributes to the body of design literature to support students learning of explicit and implicit knowledge (Boling et al., 2016; Land et al., 2016; Salama, 2015). A 2017 learning- by-making (LBM) unit in the School of Architecture and Design, at the University of Tasmania, Australia, developed a unit for students to collaborate with Neville Smith Forest Products Pty. Ltd. (NSFP). NSFP is a local Tasmanian timber product manufacturer who currently stockpiles out-of-grade timber that has limited market applications. Undergraduate design students from second and third year Furniture, Interior and Architecture degrees collaborated with NSFP to value-add to their out-of-grade resource in the LBM unit. A series of design challenges, observations of industry practice and access to out-of-grade timber from NSFP exposed students to live industry problems and provided them the opportunity to build professional design skills. Students reflected on the collaborative LBM unit in a reflection journal, which was used to provide evidence of their learning experiences. The collaborative environment between academia and industry allowed students to acquire an understanding of timber product manufacturing that helped them develop empathy towards the industry problem and influence the development of new products. This study presents how student reflections influenced a change in their design process as they progressed through sequential design challenges to address an industry problem by adopting Valkenburg and Dorst (1998) reflective learning framework.
Decisions made by user interface designers play an influential role in how people interact with software, this is especially true when it comes to the creation of tools to support teaching. As technology continues to play a more prominent role in schools, it poses an important question about how the design of learning tools influence what teachers do in classrooms. Data analytics is one opportunity technology offers for teachers to foster collaboration in student groups. Data analytics have the potential to provide teachers with a live view of what students are doing when using technology, which research shows is challenging to implement in classrooms. This paper focuses on the process to design a tool that assists engineering discussion session teacher assistants (TAs) to monitor collaboration within groups. We report on findings from interviews with TAs on what they anticipate they would need in order to support group work, and discuss how their responses influenced the design of this tool.
Two German pioneers of sensory development education, Christof Drexel (1886-1979) and Hugo Kükelhaus (1900-1984) pursued methodical investigations into perceptual principles of cognition and design in order to discover the ways in which aesthetic principles can develop and guide sensory response. Drexel and Kükelhaus traveled parallel investigative paths, both merging formal aesthetic practices with perceptual psychology. It was not until 1950, when these visionary thinkers finally met in person, that they joined forces to present their discoveries which determined that experiences are momentary intersections between internal and external realities, and are intrinsically intertwined in the deepest levels of consciousness, publicly. Both Drexel and Kükelhaus believed in the value of using the senses as pedagogy and that they should be integrated into every level of education. Correspondence between Drexel and Kükelhaus after 1950 illuminates the theoretical paths and applicative forms generated through the interplay of experimental psychology and applied aesthetic practice. This paper provides insights into the artistic and scientific dynamics based on Drexel’s examination of archetypical imagery and the psychic line, and the sensory development applications designed by Kükelhaus.
Futures techniques have long been used in large enterprises as designerly means to explore the future and guide innovation. In the automotive industry, for instance, the development of concept cars is a technique which has repeatedly proven its value. However, while big companies have broadly embraced futures techniques, small- and medium-sized enterprises (SMEs) have lagged behind in applying them, largely because they are too resource- intensive and poorly suited to the SMEs’ needs and idiosyncrasies. To address this issue, we developed DIVE: Design, Innovation, Vision, and Exploration, a design-led futures technique for SMEs. Its development began with an inquiry into concept cars in the automotive industry and concept products and services in other industries. We then combined the insights derived from these design practices with elements of the existing techniques of critical design and design fiction into the creation of DIVE’s preliminary first version, which was then applied and evaluated in two iterations with SMEs, resulting in DIVE’s alpha version. After both iterations in context, it seems that DIVE suits the SMEs because of its compact and inexpensive activities which emphasize making and storytelling. Although the results of these activities might be less flashy than concept cars, these simple prototypes and videos help SMEs internalize and share a clear image of a preferable future, commonly known as vision. Developing DIVE thus helped us explore how design can support SMEs in envisioning the future in the context of innovation.
Fundamental to design education is the creation and structure of curriculum. Neither the creation of design curriculum, nor the revaluation of existing curriculum is well documented. With no clear documentation of precedent, best practices are left open to debate. This paper and presentation will discuss the use of a survey as a research tool to assess existing curriculum at Iowa State University in the United States. This tool allowed the needs and perspectives of the program’s diverse stakeholders to be better understood. Utilizing survey methods, research revealed the convergence and divergence of stakeholders’ philosophies, theories and needs in relation to design curriculum.
Accreditation and professional licensing provide base level of guidelines for design curriculum in the United States. However, each program’s curricular structure beyond these guidelines is a complicated balance of resources, facilities, faculty, and the type of institution in which it is housed. Once established, a program’s curriculum is rarely reassessed as a whole, but instead updated with the hasty addition of classes upon an existing curricular structure. Curriculum is infrequently re-addressed, and when it is, it is typically based on the experience and opinions of a select group of faculty. This paper presents how a survey was developed to collect data to inform curricular decision- making, enabling the reduction of faculty bias and speculation in the process. Lessons learned from the development of this research tool will be shared so it might be replicated at other institutions, and be efficiently repeated periodically to ensure currency of a program’s curriculum.
This paper studies a design workshop that investigates complex collaboration between fundamental physics and design. Our research focuses on how students create original artefacts that bridge the gap between disciplines that have very little in common. Our goal is to study the micro-evolutions of their projects. Elaborating first on Actor Network Theory (Latour, 1996; 2005) we study how students’ projects evolved over time and through a diversity of inputs and media. Throughout this longitudinal study, we use then a semiotic and pragmatic approach to observe three “aesthetical formations”: translation, composition, and stabilization. These formations suggest that the question of material agency developed in the field of archeology and cognitive science (Knappett & Malafouris, 2008) need to be considered in the design field (Renon, 2016) to explain metamorphoses from the brief to the final realizations.
Most academic methodologies are developed from a prescribed methodological process that is limited to a specific area of study. However, the disciplinary landscape in which the knowledge is established is being rapidly reconfigured. Given the vast varieties of practices and knowledge base required from information designers, it is even more crucial for them to look outside of the traditional visual design fields and seek diversities for better research and creation methods.
The two disciplines, software engineering and information design, are often perceived as one provides technical solutions to the other. This essay intends to move beyond the common perception, and identify relevant issues in software engineering design that resonate with the information design process. The issues include the multi-component planning approach; the human-oriented agile method; design concepts such as abstraction, decomposition, component modularity, hierarchical relationship, and extensibility. The perspectives from software engineering design and information design is examined through units of analysis, terminology explanations, and forms of communications. The collective design methods and principles provide a systematic framework to the methodological thinking in information design. The discussion serves the purpose of encouraging more conceptual-based conversations between information design and other disciplines, especially in the fields of science and technology.
To limit the harm and damage caused by river flooding, signs to indicate dangerous water levels are placed along the river, particularly where there is a danger of overflow. However, the general level of awareness of such signs is low. In this study, we examined ways to efficiently convey information that people have little interest in and find difficult to understand.
Dangerous water levels are quantified and communicated using colors to indicate the degree of danger, and this information is conveyed to the public with signs on bridge piers and slopes. Various other measures are also employed, e.g., adding evacuation pictograms to signs, displaying signs separate from graduated water level indicators, and providing detailed information via the river office website. In addition to using Internet channels such as websites and Facebook, it is common to create and distribute pamphlets and other kinds of printed notifications to communicate such important information as widely as possible. Nevertheless, information that is essential in an emergency but unnecessary at ordinary times is difficult to communicate widely and effectively, even if all these measures are taken. This is because even if people accept that such information must be understood, they remain uninterested and find the information difficult to understand. To solve this problem, we created a story featuring mascot characters for each danger level. This story, presented as a picture book, overturns the conventional attitude toward such information. We thereby developed a medium for communicating important information in a way that better captures people’s interest.
Traditional craft has been relegated to the margins in modern culture, being perceived as out step with technological, economic and societal progress. However, emergent research is rediscovering the nature of craft and its potential for contributing to design practice in conjunction with developments in science and technology. Through the analyses of craft and sustainability, strong connections are revealed as well as some incompatibilities. The contribution of this paper is to a) map a systemic view of craft and b) establish a theoretical understanding of the relationship between craft and a holistic understanding of sustainability. Drawing on recent research that proposes three areas of leverage for sustainability, we argue that craft, as a system of making, knowing and being, has significant potential to contribute actively and tangibly to the transitional conditions, thereby serving as an agency for sustainable transformation.
When design works with industry it tries to sell two things, first, selling design as an agent of transformation, and second, selling design as a skill. Whilst historically design has been successful in the latter, it is the former that is more challenging, making it a necessity for design to work in none design contexts in order to build trust and credibility. Therefore, it is necessary to investigate the ways in which design interacts with industry, and how these interactions enable design to establish longer term relationships.
This investigation set out to answer the question, what design specific characteristics are applied to establish successful longer-term relationships between design and industry? The paper aims to illustrate the intrinsic factors that enable design to get access, and designers to get authority to play a significant role in organisations. Five well-established relationships between design and industry have been used to analyse to find correlations.
The investigation identifies three stages of collaboration between design and industry, namely, involvement, collaboration and partnerships, contrary to Cahill’s (1965) theoretical model, which claimed four stages to long lasting partnerships. Also, the case studies confirm three stages of trust and credibility as factors that help in strengthening a relationship between design and industry. Finally, several intrinsic factors that are unique to design have been identified, which are seen to have helped design in building high levels of trust and credibility.
Living in a modern society is becoming more complex, so in order to keep up with, a person should accomplish various kinds of task at once. Daily life requirements, obligations and the capacity of human memory lead us to collect and control our behaviors, bodies and lives through self-tracking devices. Aim of this paper analysis of emerging digitalized self-tracking trend through content analysis of Wired Magazine. Wired Magazine, both in printed and online, monthly, publish technology related articles how emerging technologies affect culture, the economy and politics. It reaches more than 30 million people each month through wired.com, digital edition. Since the term 'quantified self' emerged for the first time in Wired Magazine, for this reason Wired Magazine is one of the most important sources to be used for content analysis. This present study carries out a content analysis of all the issues until December 2016 through 'self-tracking' and two other related terms: 'quantified self' and 'lifelogging'. The usage period and popularity of these terms and, the relation network with the main topics and the subtopics are examined. As a result, it is possible to define wired magazine as a medium in which industry-academia and users come together and, feed each other reciprocally. Wired Magazine have contributed significantly and continues to contribute to the development of the digitalized self-tracking trend in terms of its content.
Effective university-industry collaboration has become a major focus for governments in recent years. Universities are increasingly expected to play a greater role in the innovation system and evidence their contribution to economic development. At the same time, the growth in research quality assessment exercises makes it imperative that the excellence of research conducted in commercially-driven activities can be appropriately evaluated. This paper explores the challenge of reconciling commercially-focused activity and research quality assessment in design. Semi- structured interviews were conducted with thirteen experts including representatives from the design discipline, other applied academic disciplines, research quality assessment leaders and commercial designers. The interviews identified a number of barriers to demonstrating research excellence in commercially-driven projects. These were classified as barriers resulting from: the nature of industry/academic relationships; the nature of the project; and the nature of the research quality assessment. It is concluded that there is a need to build a simple, easily usable framework for assessing the research potential of commercially-driven design projects from the outset to ensure that the appropriate processes are put in place to communicate research conducted within them.
The purpose of Experience Group Sessions is to identify the health and lifestyle challenges that make it difficult for patients and families to manage chronic medical conditions. The Innovation Engine at Carolinas HealthCare System worked with pediatricians to identify and recruit patients with chronic asthma. Experience Group Sessions were a way for families and patients to share their experiences managing asthma and allowed facilitators to gather insights about what does and does not happen in their daily lives. The key themes and quotes collected from the Experience Group Sessions were grouped into three categories of outcomes that define success with health: capability, comfort and calm. The results of the analysis were shared with the workgroup to inform the design and strategy for an integrated practice unit. Integrated practice units are intended to bring together a full range of providers and services to specifically address a certain medical condition, in this case, pediatric asthma at Carolinas HealthCare System. This integrated practice model will be reorganized around patient-centered care and value to improve overall health for children with asthma.
In the past decades, universities’ involvement in socio-economic development, which goes along with their teaching and researching activities, has defined a new role for them in society’s ecosystem. This new role is often referred with the term of “entrepreneurial” university, whose objectives are positive societal, economic and environmental impacts. In order to fulfil such objectives, entrepreneurial universities might engage in cross-sector collaborations with external organisations. Despite the great contributions that cross-sector collaboration can give to the partners involved, the outcome is mostly unfocussed and rarely embedded. This paper explores the outcome embedding in the cross-sector collaboration between entrepreneurial universities and the private sector. To this end, we provide the case of the collaboration between a Dutch airline company and four Dutch entrepreneurial research and teaching institutions. We aim to uncover hindering and enabling factors to the outcome embedding in order to design an interaction platform, design it together. This platform will be a tool to encourage the outcome embedding, moving from being inspired by to the actual implementation of the cross-sector collaboration. In order to fulfill this goal, this study employs a research through design methodology. This approach is a generative process, where cyclic loops of iterations and evaluations with stakeholders tend to the research goal. The solution is a digital platform, co-created with all stakeholders. This study can inspire practitioners and future research on the problem of unsuccessful cross-sector collaborations, between entrepreneurial universities and external organisations, with more emphasis on the value of embedding and translating the outcomes.
Solution-generation design behavior in general, and "reflection-in-action" in particular, can serve to differentiate designers, recognizing their personal reflecting when designing. In psychology, reflection is found a more robust tool to enhance task performance after feedback from a personal "device" that generates the process itself while interacting with visual representation. Differences among students' interior design processes appear in their solution-generation design behavior. A “think aloud” experiment identified solution-generation behavior profiles. Qualitative and quantitative methodologies showed how design characteristics unite, forming patterns of design behavior. A comprehensive picture of designers’ differences emerged.
The research aimed:
to identify individual design students’ solution-generation profiles based on design characteristics.
to show how reflection-in-action appearing in the profiles can serve to predict how novice designers learn and act when solving a design problem.
to enhance the uniqueness of reflection-in-action for designers as distinct from reflection in other fields.
Four distinct solution-generation profiles emerged, each showing a different type of reflective acts. Identifying reflection-in-action type can robustly predict how designers develop design solutions and help develop pedagogical concepts, strategies and tools.
From the 1980s, design thinking has emerged in companies as a method for practical and creative problem solving, based on designers’ way of thinking, integrated into a rational and iterative model to accompany the process. In companies, design thinking helped valuing creative teamwork, though not necessarily professional designers’ expertise. By pointing out two blind spots in design thinking models, as currently understood and implemented, this paper aims at shedding light on two rarely described traits of designers’ self. The first relies in problem framing, a breaking point that deeply escapes determinism. The second blind spot questions the post project process. We thus seek to portray designers’ singularity, in order to stimulate critical reflection and encourage the opening-up to design culture. Companies and organizations willing to make the most of designers’ expertise would gain acknowledging their critical heteronomy to foster innovation based on strong and disruptive visions, beyond an out-of-date problem solving approach to design.
Throughout the history of design teaching in Higher Education, there has been an assumption that students need to physically encounter objects to fully understand and appreciate them.
However, in this digital age, the physical encounter has been superseded by the myriad detailed images and information that is readily available on-line and in print.
This concern drew together a museum curator and a 3D Design educator. One was concerned that the digital experience lacked the visceral and emotional experience of engaging with physical objects, and highlighted a difficulty of facilitating access to meaningful, contemporary, objects. The other, whose largely historic collections were increasingly considered “irrelevant” to contemporary design practice, understood the value of materiality as fundamental to a museum’s existence, and its role in teaching and research.
The result was the establishment in 2013 of the “Material & Process Innovation Collection”, a museum quality collection, comprised of objects that are cutting-edge in terms of their material and process-led approaches to making, manufacture and distribution. The collection is driven not only by curatorial concerns, but by teaching and research, challenging the conservatism of museum collecting by taking innovative objects of untested materials and unknown makers, and hands the responsibility of collections development to non-curators.
The research presents an analysis and reflection on bringing the physical back into the classroom, the value of this experience within teaching, learning and research, and reveals if there is merit in the assumption that sensory engagement with physical objects is of greater value than the digital experience.
This paper will address some design concerns relating to philosopher Étienne Souriau’s work Les différents modes d’existence (2009). This has important bearings upon design because, first, this philosophical attitude thinks of designing not as an act of forming objects with identity and meaning, but rather as a process of delivering things that allow for a multiplicity of creative remodulation of our very existences. Secondly, Souriau unpicks the concept of a being existing as a unified identity and redefines existence as a creative act of nonstop production of a variety of modes of existence. In doing this he not only moves ontological considerations to the fore of philosophical discussions away from epistemological ones, but does so in such a way as to align with attitudes to ethics that relate it to ontology – notably the work of Spinoza. (This places Souriau in a philosophical lineage that leads back, for example, to Nietzsche and Whitehead, and forward (from his era) to Deleuze and Guattari.) In thinking both ontology and ethics together, this paper will introduce a different approach to the ethics of design.
This paper engages with the literature to present different perspectives between forecasting and foresight in strategic design, while drawing insights derived from futures studies that can be applied in form of a design-inspired foresight approach for designers and interdisciplinary innovation teams increasingly called upon to help envisage preferable futures. Demonstrating this process in applied research, relevant examples are drawn from a 2016 Financial Services industry futures study to the year 2030. While the financial services industry exemplifies an ideal case for design-inspired foresight, the aims of this paper are primarily to establish the peculiarities between traditional forecasting applications and a design-inspired foresight visioning approach as strategic design activities for selecting preferable futures. Underlining the contribution of this paper is the
value of design futures thinking as a creative and divergent thought process, which has the potential to respond to the much broader organizational reforms needed to sustain in today’s rapidly evolving business environment (Buchanan, 2015; Irmak, 2005; Muratovski, 2016).
Behaviour insights have been extensively applied to public policy and service design. The potential for an expanded use of behaviour change to healthcare quality improvement has been underlined in the England’s National Health Service Five-Year Forward View report, in which staff behaviour is connected to the quality of care delivered to patients and better clinical practice (NHS, 2014). Improving the quality of healthcare service delivery involves adopting improvement cycles that are conducted by multiple agents through systematic processes of change and evaluation (Scoville et al., 2016). Despite the recognition that some of the recurring challenges to improve healthcare services are behavioural in essence, there is insufficient evidence about how behavioural insights can be successfully applied to quality improvement in healthcare. Simultaneously, the discussion on how to better engage participants in intervention design, and how to better enable participation are not seen as fundamental components of behaviour change frameworks. This paper presents an integrative approach, stemming from comprehensive literature review and an ongoing case study, in which participatory design is used as the conduit to activate stakeholder engagement in the application of a behaviour change framework, aiming to improve the processes of diagnosing and managing urinary tract infection in the emergency department of a hospital in England. Preliminary findings show positive results regarding the combined use of participatory design and behaviour change tools in the development of a shared-vision of the challenges in question, and the collaborative establishment of priorities of action, potential solution routes and evaluation strategies.
The purpose of this study is to plan and operate design-workshops based on project-based learning (PBL), and examine their educational value for students. The PBL workshop encour- ages direct participation from students and produces educational value, and it is important to raise the interest level of workshops to elicit proactive participation. The workshop in this study was carried out over two weeks in January 2017 at Korea’s Yonsei University. The workshop was composed of eight teams of students from three countries, including Korea, China, and Japan, and the course was primarily divided into two sessions. The workshop participants examined in this thesis were notably satised with the elements of the course meant to garner interest. In the questionnaire results, participants also indicated that they obtained ample educational value through the workshop. An important element of the workshop was to connect the participants with businesses, which is also an important component of design education. Despite this, participants expressed a relatively lower level of satisfaction com- pared to other elements of the workshop. The results and analysis of this study will hopefully become a meaningful resource for educators when designing workshops in the future.
High-stakes testing that became the norm after the No Child Left Behind Act of 2001 helped condition students to strive for correct answers for clear problems, all on the first try. However, the iterative process inherent in designing requires risk-taking to conduct a trial-and-error process of defining problems and exploring possible solutions. This design research project was operated with Miami University Graphic Design students to test their willingness to take risks in their coursework to achieve their self-defined measures of success. Students identified that improving their skills was how they defined success. An interaction design assignment involving front-end coding was modified to test students’ comfort taking risks to grow their skills. Most students took risks in the assignment to grow their interaction design skills. The project revealed that closer attention to student motivation when developing learning experiences could help students make the transition to practicing design as an iterative process fraught with risk.
Developing successful RNPs can bring competitive advantages for companies. However, the success rate of RNPs are relatively low because consumers often feel resistant to adopt
them. One reason for consumers’ resistance is their lack of comprehension of RNPs. To facilitate consumers’ comprehension, this paper conceptually discusses the opportunities related to designing the appearances of RNPs. More specifically, to facilitate consumers’ internal and external learning, this paper explores four underlying mechanisms: 1) product appearance as a visual cue to trigger category-based knowledge transfer, 2) to trigger analogy-based knowledge transfer, 3) product appearance as an information carrier to communicate innovative functionality directly, and 4) product appearance as a way to trigger congruity with innovative functionality of RNPs. The rationales for each underlying
mechanism are conceptually discussed, supported with relevant empirical evidence and examples found in the markets.
Designing successful products and services that people like, requires an understanding of the context and the aspirations of those people. Over the past decade, a range of methods has been developed to help designers gain such empathy. These have worked well when designer and target user share a cultural context. However, designers often find it difficult to empathize with the user insights of individuals from a culture beyond their first-hand experience. To help designers step beyond this limitation, those user insights need to be placed in a larger understanding of the cultural context. In this paper, we present Cultura: a toolkit that uses nine cultural aspects based on cultural models, informing designers about user insights in a broader cultural context. The toolkit was evaluated in design sessions with four design teams. The findings indicate that Cultura provides inspiration and motivation for designers to gain empathic insights into users beyond their own cultural boundaries and to make effective designs for people.
Learning pressure affects students’ learning process and performance. Industrial design education emphasizes that operations on real design problems that have heavy working loads may cause learning pressure. The purpose of this study is to explore the issues causing learning pressure and the pressure management strategies of undergraduate industrial design students. There were 297 students who participated in the questionnaire survey. The main findings are as follows: First, learning pressure includes academic pressure, peer pressure, self-expectations, time pressure, financial pressure, pressure from instructors, external pressure, future career, pressure from parents, resource pressure, achievement, and situational pressure. In addition, the main learning pressure is caused by finance, time, resources, external issues, and future career. Second, the pressure management strategies include problem solving, procrastination and escape, help seeking, leisure, emotional management, and self-adjustment. The most useful strategy for managing pressure is leisure, and procrastination and escape is the least useful strategy. Third, all learning pressures are significantly correlated with procrastination and escape strategy, but the coefficients are low. The results can be a reference for industrial design education and related research.
Western cultures focus on salient objects and use categorization for purposes of organizing the environment (an analytic view), whereas, East Asians cultures focus more holistically on relationships and similarities among objects when organizing the environment (a holistic view). Previous research has shown that cognitive approaches differ between cultures: European Americans prefer an analytic style, and East Asians tend to use a holistic style. However, little is known about how cultural differences in cognition relate to aesthetic preferences. In this paper, we explored whether cultural differences arise in preferences for products set in matching vs. mismatching contexts. Participants in a laboratory experiment included European Americans and East Asians. Individually, they viewed images of a variety of furniture products (chairs, coffee tables, and floor lamps) and rated their aesthetic appeal. Each product type appeared in three different contexts: matching (target product shown in its usual in-home context); mismatched (target product shown in an unusual in-home context), and neutral (the target product shown on a white background). For both cultural groups, products were judged to be more aesthetically pleasing in the matching than in the mismatched context. However, ratings for products in mismatching contexts were significantly higher among East Asians. Our findings suggest that those with holistic views (East Asians) are more tolerant of mismatches than are those with more analytic views (European Americans). The implications for product and marketing design include greater attention to context presentation.
The deterioration of linguistic abilities is a natural phenomenon along with aging. Therefore, various assessment tools have been developed to measure linguistic abilities of seniors and diagnose
degenerative diseases such as dementia. Although most of the tools are composed of images, there are not many studies focusing on the visual design, which could significantly affect performance of the subject. In this regard, this research aims to suggest a design guideline for linguistic ability assessment tools concerning the key characteristics of the elderly, focusing on visual contents and interface.
Existing related researches were mostly conducted in English speaking countries. In order to assess the language processing abilities of Korean-speaking elders more accurately, it is necessary to develop language processing assessment tools that reflect the unique linguistic features and structure of the Korean language. Regarding the existing tools, there is a lack of research on aging, focusing on ‘verb naming.
In the literature review section, the paper investigated the physical, cognitive and emotional characteristics of the elderly and extracted the key elements to consider when designing for the elderly. Also, design principles were found based on case studies and problem analysis of the existing assessment tools for language processing abilities. Lastly, we created a prototype model using ‘verb naming.’ Using the model, we have conducted an experiment and comparative analysis between different age groups to verify the validity of contents.
In conclusion, we provided a design guideline for visual contents and interface of linguistic assessment tools, focusing on elderly users.
Smart home is becoming a focus in both literature and product development practices. The current study employed a human-centered design approach to understand users desires and expectations from their living context. Six critical themes were developed via in-deep interview, field observation, and data analysis. They are house as a supportive friend, atmosphere generator, theme songs for every moment, coordinator and reminder, life memory collector, and routine builder for young generations. Those concepts were partially integrated to define the value proposition for the target user group of parents with young children. This guides the design ideation and video prototyping to illustrator the user experiences. Through a focus group discussion, the design concepts were validated with six potential customers. The results also show that the design concept has the potential to motivate children’s behaviors, help to build their routine, and has the flexibility to fulfill different needs toward the changes of the family’s life cycle.
Carnegie Mellon University's School of Design partnered with Cognizant Technology Solutions on a design project for a semester-long elective course called UX Design Tools. The intent was broad in its inception: identify emergent opportunities where technology will play a significant role in people's interactions and experiences. What is the future of physical space? How are advancements in IoT, augmented reality, and telematics influencing how we experience environments?
Students were asked to anchor their problem solving in evolving human needs and to understand the role technology plays. Cognizant's human-centered development approach relies primarily on ethnographic inquiry. This evidenced through integrating their anthropologists from acquired firm Idea Couture, and associates from strategic partner ReD Associates. The interdisciplinary majors from upper-level undergraduate to graduate level students learned to use and create multi- method research approaches to identify unique opportunities.
Seven teams created future scenarios with newly developed physical product designs, digital interfaces, and new service strategies utilizing various technologies. Three case studies highlight a trio of observed emotional themes in relation to how people utilize technology to benefit their daily life or work: self-
election, introduction-exchange, and co-dependency.
This poster presentation will showcase three projects that will serve as examples of how industry and academia act as research and development entities; how to approach research as a
fundamental tenet for innovation and design; and show how breadth and depth of interdisciplinary skills and experience is a necessity in an ever expanding climate of technology push.
How do arts-based writing endeavors catalyze generative thinking and support research development in design students’ thesis endeavors? This paper offers reflections from an industrial design masters student, a graphic design masters student, and their arts education professor in a School of Design at a Research I institution. Informed by theoretical and historical contexts of the design discipline and perspectives from composition studies and fine arts practice, we explore the potential of arts-based writing as an evocative, speculative tool and a distinctive form of reflective practice for the development of graduate design research. We suggest that arts-based writing’s iterative process, dialogic engagement, and speculative approach to knowledge-construction provide critical, reflective structures for working through uncertainties and thus are uniquely responsive to the evolving epistemologies of the transdisciplinary university. Three focal questions guide this reflection: What is arts-based writing? What role does arts-based writing play in students’ design research endeavors? How can arts-based writing practices support the growth of speculative and pragmatic design research?
Starting or growing a co-op/internship program can be intimidating; for both educators and potential employer partners. In an effort to learn the pain points for both parties, opportunities
to break down barriers and build bridges, and identify actionable steps to get started, faculty from the University of Cincinnati’s Division of Experience-Based Learning and Career Education conducted a two-year research project with 65 co-op and internship employers from more 15 unique industry clusters, and 50 university faculty and staff representing 24 unique institutions. This poster will graphically share the resulting findings from more than 1250 qualitative responses, and generate discussion on the educational pedagogy of creating best practices for employer partners. Find out what “the survey says”!
As society shifts towards an increasingly sustainable future, high-performance buildings can provide a means to meet sustainability and energy efficiency goals. Occupants in high-performance buildings are often expected to interact with building systems to maintain individual levels of comfort and productivity. However, the critical role of the human-building interface is often ignored (Day & Heschong, 2016). Too often, building controls are not intuitive and poorly understood by typical users. Conversely, some buildings rely on entirely automated building systems (e.g. lighting, shading, HVAC systems), which take control away from occupants. This approach is largely unpopular with building occupants. The literature suggests people desire and prefer control of their interior environments (e.g., Escuyer & Fontoynont, 2001). Designing a high-performance building that effectively engages users presents a more complex problem than most designers are prepared to handle.
Design teams require an ability to see the whole situation—from how the parts of the system work to how users will engage and adapt the system. This ability relies on systematic efforts to understand broad swaths of human behavior and design research, which go beyond computation or modeling (e.g., Huppatz, 2015; Rittel & Webber, 1973). In this context, design and design research supports third order (activities and processes) and fourth order (environments, organizations, and systems) design problems (Buchanan, 1999). Creating design teams, who can comprehend a whole situation, requires reframing how clients and designers understand design problems. This draft paper links theory about design problems with practical processes for using design research to improve the human-building interface.
Design argument and ability to recognize complex systems (Rittel & Webber, 1973) and find a way to modify them, has led other disciplines to try to understand design process and apply it to other areas of knowledge. Creative solutions and ability to innovate (Verganti, 2009) have made design a valuable resource on the contemporary economy. Nevertheless, there is still a polemic about the meaning and model of the process of academic research in the field of design (Muratovski, 2015), the ways in which design research should be conducted and the specific knowledge that is produced with the design research process.
This paper tries to recognize the prototype as a basic element of the process of design, since is connected to a specific type of knowledge and based on that; it also proposes a model of the
use of prototypes as a research tool based on four different theoretical concepts which importance in the field of design have been strongly stablished by different academic communities around the world.
Identifying Infants can be harder than it seems. Particularly in remote and limited resources settings, rapid and accurate identification of infants presents an unsolved complex sociotechnical problem. Imagine a long line of caregivers, each carrying several children, waiting outside in heat and humidity for required vaccinations. Caregivers may only know the infant's given names: how can the they be identified for record keeping?
Vaccination cards are notoriously unreliably and easily lost, mistakes abound. Recent technologycentered attempts th
In order to develop a new, infant-centered solution from the ground up, we assembled a diverse team of engineers, clinicians, ethnographers and designers and followed a Human Centered Design (HCD) approach of ethnography, rapid prototyping and testing. We examined all common modalities used in adult biometrics-- ear, iris, retina, face, foot, palm and finger recognition and compared technical feasibility, usability and acceptability for the infant use case. We prototyped many infant-centric devices and arrived at lead candidates using modified contact vs non contact palm and finger scanning. Frequent design-test cycles were critical as the complexity and changing nature of infant physiology, behavior and caregiver dynamics could not be predicted, only tested with subjects. This was compounded by moving targets of evolving infant-centric software, hardware and device design.
In summary, we report here an HCD based approach to infant biometrics. We developed and tested robust, socially acceptable technologies that adapt to the tiny, sensitive yet changing fingers of very young infants.
Graphic design students require a foundation in understanding, utilizing and conducting research. The discipline would benefit from standards for quantitative, qualitative, mixedmethods and practical approaches to graphic design-specific research. This paper examines the role of graphic design research in college-level graphic design pedagogy. This study is motivated by two research questions:  what theoretical analysis and practical approaches to graphic design research are graphic design educators currently implementing?  How can college-level graphic design educators build a culture of research literacy in graphic design baccalaureate programs?
Literature describing the theoretical and practical instruction of graphic design research in college-level graphic design education is limited. The intention of this study is to advance the understanding of how graphic design educators define and implement graphic design research, first through qualitative analysis of a survey of four-year, graphic design degree program professors across the U.S. followed by in-depth interviews with published educators practicing research.
The study’s interviews elaborate on the specifics of graphic design research through the lenses of professors developing and implementing graphic design research in four-year undergraduate programs, in their own practices, and in the discipline-wide conversation and study of graphic design research itself. In the study’s conclusion, potential future research is discussed.
There is considerable interest within the design research domain in the possible cognitive functions and actions as ‘design thinking’ is used. This proposal commences with reference to Senge who suggests, “Truly creative people use the gap between vision and current reality to generate energy for change”. He drew from the musician Fritz, who proposed, “It’s not what the vision is but what the vision does,” (1990, p.153). The imagined ideal in a vision seems to act like a spike setting off self-urging creative intuitions and insights and instinctive reactions. A conceptual series of diagrams will develop these insights where an imagined ideal is to be set up as the vision as the anticipated experience of a ‘best-possible-self’ with success, where emergent ‘ideas-of-best-fit’ closely match the designer’s goals and desires. The triggering mental actions required are similar in form to De Bono’s technique based on ‘Six Colored Hats’ (1985). In this project, however, the practitioner adopts an overarching meaningful ideal for a ‘hat’ in the form of an experiential clear sense of success as motivating ideations emerge, such that these closely match their goals and desires as a ‘best-possible-fit’. The model is also potentially transformative as the visioning ideal could be framed such that any emergent effects of encoded formed bias or a self-limiting psychology could be effectively reduced or eliminated through the applied created differential as a ‘generative gap’ for the self. This paper will further suggest how this envisaged ideal of success could be experientially explored through co-creative action cycles of research in different design-thinking domains.
Today’s design pedagogies lack the characteristics for redressing the nature of the ‘wicked problems’ they attempt to solve, such as sustainability. We argue it is not fair for future generations to suffer the systemic effects of our unsustainable consumer culture, partly resulting from today’s design professionals’ decisions, which ensue because design is an amoral discipline lacking a systemic perspective.
To rectify design’s characteristic failings, as part of a PhD study, we report a new pedagogical architecture founded as the synthesis of the practices of design and civics, forming the relationship design-as-civics (DaC): a practical philosophy. We position DaC as a reflexive, systemic radical political praxis for every citizen, possessing the explicit teleological goal to achieve the ‘good life’ for all.
DaC takes a transdisciplinary approach. It integrates the discoveries of cognitive science and linguistics to expose how we construct our understanding of the world interpreting metaphors and frames, which we utilise to ‘aim’ DaC. Alongside shared social practice theory (SSP) and insights from developmental psychology that reveal the distinctly human capacity of “shared intentionality” engendering humankind’s willingness for cooperation and empathy for fairness. That living in a fairer society is desired by people from rival political perspectives, with egalitarian societies reporting lower environmental impact lifestyles and more willingness for transitioning towards sustainment.
Thus, it is humankind’s cooperative behaviour and aligning values that provides the foundational rationale of DaC’s SSP goal to achieve the ‘good life’ through the ongoing critical examination of its ‘aim’ of resolving ‘fairness between citizens.’
The profession of industrial/product design has the capacity to support wealth generation through a product-driven supply chain that extends across services that include manufacturing, distribution, sales and maintenance. Moving away from the more typical manufacturing approaches of developed countries, where the resources available to support designers employ advanced technologies and materials, this paper discusses an on-going UK Arts and Humanities Research Council-funded project to explore ways in which industrial/product design can provide opportunities for entrepreneurship and employment in countries on the Organisation for Economic Co-operation and Development (OECD) Development Assistance Committee (DAC) List and receive Overseas Development Assistance (ODA). Through practice-lad research with participants from Uganda, Kenya, Indonesia and Turkey; industrial/product design educators/researchers/practitioners shared knowledge and expertise and engaged in creative activity to translate propositions into proposals with the potential for manufacture in each of the four countries. The findings, articulated product visualisations, indicate significant potential to support manufacturing in countries in a variety of levels of economic development by adding value to the packaging of traditional foods; integrating low-cost imported components to add value to indigenous crafts and materials; producing contemporary furniture designs using materials that can be considered as traditional materials; and employing unorthodox and unexpected materials.
This project is being built on the site of a thousand-year-old mosque, one of five sacred places in Iraq. People visit the place to pray, not simply because it is an old mosque, but rather because they think that the last descendant of the Prophet Mohammed will eventually be resurrected with Jesus Christ and will pray there. In 2006, an architect was hired to design the building. The premises were: 1) the design should promote the concept of sacredness, 2) this project should show belonging to the society, and 3) it should last for centuries. The results
were controversial, however, by the time it was revealed to the public, the foundations had already been casted, in the hopes that people would eventually accept it. On the contrary, visitors and pilgrims became upset and began to protest the design. The construction process was thus halted in 2008, and we were hired to utilize the same foundations for a new design, one that fitted with the pilgrims' notions of “sacredness”. We began the project by surveying people’s ideas about what mosques on “holy” sites might look like, determining what a “sacred” place meant to them, and why some places are “sacred.” We discovered that most
people think that “sacred” places should seem old. They also singled out some “sacred” examples for us. All these examples have one characteristic: the all hide “a certain kind of mystery”. We studied those examples and then developed our proposal, it was approved in 2011 and will be opened for public in 2018.
This study hypothesized that humans give priority perception to product shapes that possess topological structures. Three experiments confirmed the proposition accordingly. The first experiment selected existing products that grab people’s attention within the prescribed time, with the experimental objects selected according to degree of topological properties and structure complexity. The results showed that visual topological properties in the products had strong visual appeal. The second experiment determined the visual prominence of freely designed and redesigned chairs according to the rating of non-expert users. The results demonstrated that products whose shape adopted topological structures were given priority attention. The third experiment intended to prove the practical value of visual topological features from a direction opposite to that of the second experiment; that is, from topological structures to deconstruction of topological structures. All three experiments showed as well that there are many cognitive limitations in the recognition of topological structures in product shapes. These unexpected problems, such as the contradiction between topological structure and habitual cognition, are discussed. The results of the study and the effects of topological properties on development are also discussed.
Different associations are important for regulating and promoting good practices of sustainable product development. On the case of children products, there are many considerations to take, such as mental and physical development or safety. Knowing this broad challenge, how can associations better aid on the development of Design Guidelines for children? In Japan, the country’s context and challenges have led to the development of the Kids Design Association, or KDA, a Non-Profit organization dedicated on the achievement of three missions: “Contribute to children’s safety”; “Develop children’s capabilities, encouraging creativity and sensitivity”; and “Support caregivers during pregnancy, birth and child raising”. Based on an investigation period, the following paper is a case study of the Kids Design Association, exposing its story, goals, relation with society, growth, and performed activities, especially the “Kids Design Award”, a commendation program for acknowledging design practices that takes children needs and standpoints in consideration. We aimed to observe design trends and challenges regarding both Japanese Society and the association. As results, although some of the procedures are oriented exclusively for Japan, we found that the KDA approach could effectively bridge companies with academic knowledge and social demands.
The “Safety Grand Challenge” is a collaborative research project between the Royal College of Art (RCA) School of Design, and the Lloyd's Register Foundation (LRF). The maritime industry is dominated by “grandfathering” leading to a slow-pace of adopting innovations that can reduce risk and save lives at sea. We describe how impact was achieved through collaboration and design innovations that bridged the risk gap between technologies and human behaviours. Starting from the project brief we designed a collaborative platform that supported a constructive dialogue between academia and partner organisations that aimed to foster innovative design approaches to risk and safety. The project generated an engaged community with diverse expertise that influenced the outcomes which included seven prototypes designed by a group of thirty students from across the RCA. Throughout the course of the project the network extended to other partners beyond the initial ones that included the RCA, LRF and Royal National Lifeboat Institution. The “Safety Grand Challenge” demonstrates how research can be an explorative platform that offers opportunities to analyse and design solutions to real life safety problems in mature industries through the prototypes that reflect the sophistication of the project’s collaborations. Our conclusions support how design research helped identify the value of design for safety in tackling complex issues that intertwine human, environmental and commercial views and can shape new forms of collaborative research between academia and industrial partners.
The growing speed with which consumers discard artifacts is a significant but regrettable part of the capitalist economy. High consumption rates are accelerated by contemporary society,
which is based on a model of values that link the notion of well being to profit generation and consumption of material goods. This exacerbated consumption cycle perpetuates environmental
damage. In this context, proposing sustainable solutions involves new ways of thinking and doing that are distant from the practices of the current model of consumer society. This paper
reflects on the necessity to implement changes into the design process, production, and consumption modalities. These changes propose a “new” role for designers as professionals, and
as individuals in society at large. This research connects the concepts of metadesign and opens design- enabling system awareness. Metadesign can be considered critical and reflexive thinking about the boundaries and scope of design, but also, as the prefix “meta” implies, it can be understood as the design of the design process, in a critical and reflective way. Open design
implies the openness of the design project for multiple actors (including consumers), information sharing, and building knowledge between them. As a result, design can lead to
consumption modalities situated in slow culture, transforming the relationship between users and artifacts.
With the enhancement of medical technology and human living standards, the world is showing a trajectory towards an aging society. The elders generally suffer from degeneration, which may cause problems in their daily lives. Aging has since become a major issue of scientific researches.
Elders in Taiwan mostly live alone or with a partner. Because eating out is not a habit, cooking often plays an important role in their lives. Due to the degeneration happening to their bodies, the danger during cooking activities increases. Therefore, it is necessary for them to seek help from assistive devices.
In this research, we will make assistive design models that help elders use woks. The designs are for the task we have chosen from our investigation. We will also evaluate the effect of the aids objectively using the EMG system, and collect the iEMG value for evaluation. The iEMG values were collected from four muscles (FDC, FCR, Biceps and Deltoids). Eight middle-aged participants who will become elders in the near future were invited to participate in the experiment. Four design solutions were chosen from seven working models. The design solutions were all helpful to the task, and the performances of the stove design solutions are significantly better than the original wok. The degrees of hand trembling while performing tasks were also measured, however the differences were not significant.
Over the last two decades, constructive design research (CDR) — also known as Research through Design — has become an accepted mode of scholarly inquiry within the design research community. CDR is a broad term encompassing almost any kind of research that uses design action as a mode of inquiry. It has been described as having three distinct genres: lab, field, and showroom. The lab and field genres typically take a pragmatic stance, making things as a way of investigating what preferred futures might be. In contrast, research done following the showroom approach (more commonly known as critical design (CD), speculative design, or design fictions) offers a polemic and sometimes also a critique of the current state embodied in an artifact. Recently, we have observed a growing conflict within the design research community between pragmatic and critical researchers. To help reduce this conflict, we call for a divorce between CD and pragmatic CDR. We clarify how CDR and CD exist along a continuum. We conclude with suggestions for the design research community, about how each unique research approach can be used singly or in combination, and how they can push the boundaries of academic design research in new collaboration with different disciplines.
In this paper we report on new challenges when teaching UX students how to sketch and prototype their designs. We argue that UX students sketch and prototype differently than other design students, and we discuss how changes in the field necessitate a response in education. We describe sketching and prototyping as a continuum that students successfully traverse when they follow a process of ‘double loop learning’. We highlight three new challenges: (1) New computational design materials, (2) new maker tools, and (3) changes within the tech industry. We explore these three challenges through examples from our students, and we outline strategies for sketching and prototyping in this new reality. We conclude that this is a starting point for further work on keeping education up to speed with practice.
CampusParc, the entity that manages and operates The Ohio State University’s parking assets under a long-term lease, engaged students and faculty in the university’s Department of Design to determine how its brand, services, and parking environments can contribute to a more positive parking experience in garages and surface lots–particularly for visitors to the main campus. This year-long collaboration involved multiple design-definition sessions between design faculty and a CampusParc design strategy team, an 8-week graduate/undergraduate design-led summer workshop, and a full semester Advanced Visual Communication Design Studio course. The outcomes included discovery themes, user journey maps, observation findings, problem statements, design opportunity proposals, and concept prototypes. Throughout this process, the students worked with, presented to, and received feedback from design faculty and CampusParc representatives. Students engaged stakeholders, university staff, and transient (visiting) parkers. By immersing students into a complex practice-based project, the students applied their design research and service design thinking in environmental graphics and branding. CampusParc is realizing new design opportunities, embracing proposed design themes and concepts, and shifting their role from a ‘utility’ to a ‘service’ provider. This new mindset is contributing to CampusParc’s interest in enhancing relationship building and crafting a friendly and approachable brand language that interjects a sense of delight. This paper captures this collaboration and presents the student-led design solutions as a case study that can serve as a model for future professional academic collaborations.
Citizen science is a process in which ordinary citizens contribute to scientific research. How to create citizen science design framework to achieve better awareness, initiative and action is our research focus. This paper will explore citizen science design in the context of smart city, on the basis of activity theory and by means of digital social innovation. “Smart City” concept provides new elements including social communication, collaborative design and innovative community to citizen science. With the rapid development of science and information & communication technologies (ICTs) and with the arrival of Web 2.0, social innovation is endowed with digital factors so as to be evolved to digital social innovation (DSI) which gives various design perspectives on citizen science and also plays an important part in establishing citizen science evaluation model. In this paper, a citizen science design framework consisting of citizen science content model, design model and evaluation model is proposed by discussing related theories, models and citizen science cases. It acts as not only design lead to inspire two citizen science case practices, but also an evaluation term in the view of citizen science. The framework and models developed in this research will hopefully be leveraged and refined to support citizen science design in the future.
The term “community-based participatory design” (CBPD) recently emerged as a distinctive space in the Participatory Design tradition (DiSalvo, Clement & Pipek, 2013; LeDantec, 2016). This move marks a shift from treating the process of design primarily as a product development method, to one that builds social and technical capacities – or infrastructures – of individuals and communities (Björgvinsson, Ehn, & Hillgren 2010; Karasti 2014; LeDantec 2016). This paper describes participant gains from a design workshop conducted as part of a research collaboration involving a university-based research center, and four NGOs, the participatory design workshop aimed to: (1) build the capacities of young people; (2) guide young people in the creation of novel and locally relevant gender and sexual and reproductive health (SRH) solutions; and, (3) bring voices of young people into research and programmatic questions around gender and SRH in the public health domain. The workshop was conducted with 31 young people aged 15-25, over 2.5 weeks, in Lucknow, Uttar Pradesh, India. The evaluation demonstrates that the workshop resulted in exposure to working in mixed-gender teams, developing problem-solving skills, and increasing SRH awareness and knowledge. The workshop produced six low-fidelity prototypes, five of which were subsequently refined and piloted by three Lucknow NGOs.
Student life at a large institution like University of California, Berkeley, is challenging in many ways. Along with the often extreme academic demands, students must discover and navigate numerous services while simultaneously integrating themselves into formal and informal campus communities. Historically, core student services were delivered in a piecemeal and disjointed way via a dozen or more websites. A large investment in a Student Information Systems (SIS) replacement project has since unified these service experiences through CalCentral, a Berkeley-developed service portal, and created with a significant focus on user experience design.
While significant strides have been made to improve and simplify how services are delivered to students, the design team has been challenged to push their vision of the service ecosystem further, to “humanize the institution.” The vision goes through the SIS project and beyond, by first switching mindsets from service producers to service providers, and second by looking at how deeper relationships can be created digitally between students and the institution. The research, with students and different stakeholder groups, shows that beyond usability and learnability, there are greater opportunities through service design to contribute to students’ senses of agency, inclusion, connectedness and wellbeing. The design team is codifying new design principles and developing prototype experiences that look more closely at tone, behavior and contributing to a positive emotional state of mind. The service delivery through CalCentral is humanized and augmented in affirming ways, to use language that is accessible, and to guide students through complex paths.
Numerous studies have dealt with what kind of value narrative can have for creating a more effective design process. However, there is lack of consideration of storytelling techniques on a stage-by-stage level, where each stage of storytelling technique can draw attention to detailed content for creating use-case scenarios for design development. This research aims to identify the potential implications for design development by using storytelling techniques. For the empirical research, two types of workshops were conducted in order to select the most appropriate storytelling technique for building use-case scenarios, and to determine the relationship between the two methods. Afterwards, co-occurrence analysis was conducted to examine how each step of storytelling technique can help designers develop an enriched content of use-case scenario. Subsequently, the major findings of this research are further discussed, dealing with how each of the storytelling technique steps can help designers to incorporate important issues when building use-case scenarios for design development. These issues are: alternative and competitor’s solution which can aid designers to create better design features; status quo bias of user which can help the designer investigate the occurring reason of the issue; and finally, social/political values of user which have the potential of guiding designers to create strengthened user experience. The results of this research help designers and design researchers concentrate on crucial factors such as the alternative or competitor’s solution, the status quo bias of user, and social/political values of the user when dealing with issues of building use-case scenarios.
This submission reports a design-driven integrated innovation on EV mobility, EV 3.0, as a collaboration between design research institution and a small BEV company in China. The on-going project provides a novel vision and design strategies of Battery Electric Vehicle (BEV) and mobility and has achieved a key technological performance on rapid charging of BEV. The current situation of BEV Industry and their recharging patterns show a big gap of new energy mobility. Key issues of BEV and mobility are defined by analysis of users’ need of mass market and a case study of a leading BEV. Usability of charging is identified as a bottleneck of BEV industry. Hence a new vision and scenario of rapid charging are defined, leading to respective design strategies and technological routines. With a long term investigation and iterative prototyping, an established prototype is developed and officially tested in the National Center of Supervision and Inspection on New Energy Motor Vehicle Products Quality in Shanghai. The test result indicates that the prototype has 431 km range in speed of 80km/h with only 15 minutes’ recharging, which provides a valid routine to break bottleneck of BEV industry .
The number of migrant workers in South Korea is on the rise, but their inadequate Korean language skills prevent them from being promoted at work, or fairly treated as respected members of the society. In this study, in collaboration with a government-authorized language educational facility for immigrants, the authors investigated (a) challenges in migrant workers’ Korean as a second language learning, and (b) design principles of lessons and learning materials specifically targeted to their needs. Student and teacher interview data confirmed that the workers’ limited time for study, weak motivation, Korean colleagues’ indifferent attitude, and limited teaching resources at educational facilities are major barriers to achieving higher levels of linguistic skills. From the data, the authors identified four design principles: personalized content, community participation, portability of materials, and micro learning modules. Informal lessons via Facebook, factory safety signs, and portable writing drill booklets are designed as on-going experimentations of the principles.
Lately, various kinds of intelligent products have been invented, and to play a part in the “intelligent” era, I designed an intelligent nursing bottle which can help a user when making up a bottle for a baby in middle of the night. The intelligent nursing bottle, Easybottle is a behaviour induce interaction product, which means that it motivates a user to do something with pleasure. As a mother of one year old, I learned that it is very important for a caregiver to feel satisfied in order to nurse a baby from the heart. Easybottle provides sound modality to notify the caregiver how much water she should pour when mixing powdered formula with water so she does not need to feel agitated to read bottle markings in middle of the night when her eyes are not fully awake.
The methodology that I applied is metaphor. As metaphors, I chose two different sounds to compare; sound of water pouring and sound of a car’s proximity sensor. The main goal was to define more useful interface for Easybottle.
I conducted quantitative within-participants experiment. This study explored whether lifelike sound works better or artificial sound works better as an indication interface. Participants evaluated the water pouring sound interface more positively than a car’s proximity sensor sound interface. Lifelike and hedonic factor appeared to be attractive to the participants and it implies that even though Easybottle is an electronic product, participants appreciate more when it reminds them of nature. Also, entertainment factor is important when doing a chore.
Design education opportunities for non-designers are abundant and growing, many offered as rapid sprints through executive education style workshops or online courses. While these quick immersions may serve to infuse design thinking into the work processes of other disciplines, there is a risk of oversimplification. How can courses impart an appropriate sense of design without minimizing its complexity? What are the essential components of design, and optimal timing and formats needed for meaningful delivery? On the other hand, how can we educate those who seek a robust design complement to their existing professions, and those seeking a full transition of their careers into design practice? This study looks at the inception and early iterations of a one-year degree program providing an in-depth education to non-designers seeking a complementary education to other credentials or a full conversion to design through modular degree options. The first years of the program suggest several findings. For example, interdisciplinary cohorts introduce a mix of rational and intuitive approaches. Students need mentorship into design processes and practices, such as subjectivity in assessments and feedback through critique. Educators are challenged to acknowledge the past education and professional backgrounds of students, capitalizing on their unique strengths rather than homogenizing all students into a singular version of design. Students need tools to assess their professional identity during their transition to design. This work in progress will examine the spectrum of design education opportunities for non-designers, including key factors differentiating a degree program from the proliferation of short course exposures.
The political rhetoric of today economy has framed innovation as reproduced and reserved by specific people in specific locations. This framing has shaped the discourse of who is deserving and who is not deserving and gradually sets the foundation of social discrimination, inequality, and exploitation as part of the neoliberal economy. Given the claim that entrepreneurs are inventing the future, this paper envisions alternative futures in which performing economy contributes to socio-technical transformation. To that end, this paper focuses on two community- based initiatives in Chicago that their contribution to economy is not recognized due to incompatibility with mainstream narrative. In these counter-hegemonic exemplars, different but potentially related future-making practices occur; they are shifting the emphasize from individual entrepreneur to a collective economic development and moving forward the discussion of entrepreneurship to the kind of society and the kinds of citizens that it is creating. By conducting ethnographic study on these exemplars, patterns have emerged that are informative to design strategies for infrastructuring and socio-material negotiations.
This paper explores the collaborative process of designing a physical object to support a National Science Foundation funded educational research project. Researchers involved with this project are exploring the ways in which gesture can aid in a explanations of science phenomena, particularly ones that have unseen structures and unobservable mechanisms. In order to manipulate the science simulations, a motion sensitive device captures students’ hand gestures. It can be difficult for students to know how to engage with this device, which impedes both student learning and associated research. In order to reduce usability challenges and enhance the connection between a student’s gestures and the scientific concepts presented on the simulation screen, a collaborative and iterative design process was conducted to create a designed form that would assist students in productively engaging with the simulations. The iterative development process of this project is an exemplar of how designed items can be developed to support multidisciplinary research projects, while also creating new fields of research. Future exploration of this device’s impact on student interaction and learning may bring to light how objects can change how people gesture in learning contexts, leaving a lasting imprint on their understanding and memory.
The term “slow fashion” was coined by Kate Fletcher to counter the growing trend of the “fast fashion” industry. In recent years, the clothing industry has been dominated by fast fashion that has spurred overconsumption whereby people buy more than they need.
This study aims to develop a critical-creative thinking framework based on the understandings and insights of how Millennials view apparel consumption. Lynda Grose and Kate Fletcher’s chapter “Transforming Fashion Product” from their book Fashion & Sustainability: Design for Change (2012) provided useful information regarding the fashion process, helping to reveal new patterns to frame how participants of this study view apparel consumption. This research investigated the way in which consumers viewed material, consumer care, and disposal of their clothing.
In order to understand the Millennial mindset with regard to apparel consumption, responses were collected from over a hundred Millennials through an online survey (Phase One), where they discussed their reasons for placing themselves along a scale from slow to fast fashion. The findings uncovered a new group of consumers, the undecided+exploring, who identified with both slow and fast fashion. Valuable insights extracted from the survey informed the development of a research toolkit for a series of participatory workshops (Phase Two) with the goal to construct a conceptual model of Millennial apparel consumption.
Further understanding of slow fashion, as seen through the Millennial mindset, will inspire and guide designers, manufacturers, and consumers to make more sustainable decision when developing, selling, and buying clothing items.
How can students at a federally-designated Hispanic-serving institution understand and express culture and diversity through art and design? In order to address this inquiry and to exemplify a method that introduces students to critical thinking in the context of design, I am presenting a case study based on the primary results of a project implemented at an introductory graphic design class, which is part of a multidisciplinary arts program. In this project, students learn basics of design research and auto ethnography in a studio setting, in order to explore heritage and culture, their context of living, family history, and personal connections with their past, present, and future. Results from this discovery stage inform brainstorming, sketching, design, and production of a book that contains multiple visual explorations on “Heritage.” Some of the most memorable and productive conversations and interactions between students took place not only during the development of the project, but at the final project presentation, which exposed their capacity to develop greater tolerance and a more empathic view of the other, to be open to reanalyze their context and personal interactions, to better evaluate the design abilities of their peers as they respond to their own individual approach to the topic, and to develop a better and safer sense of place in the classroom.
Case studies are discussed, from Northumbria University’s practice-led Centre for Design Research (CfDR) that demonstrate how visualising concepts and designs through digital animation can enable effective communication of ideas and interactions, which in turn enables creative leaps in thinking, understanding and decision-making. Animation is a tool that can unlock the comprehension into what is and what could be. This paper reflects on a number of collaborative projects between the CfDR and several scientific communities, demonstrating and focusing in particular on the process of visualisation, designing digital animations to communicate complex processes, ideas and interactions. An approach and understanding has been developed about how to effectively communicate potentially complex, scientific and technical concepts for the benefit of the client and the end user, in particular the lay audience whose knowledge of the subject may be limited or non-existing.
Findings indicate that the process of constructing simple digital animated stories becomes a learning process for both designer and client. Critical discussions during collaborative meetings develop shared understandings: helping clients to think more creatively about communication (appreciating the benefits of manipulating a truth to position to waylay contextual confusion), and making implicit knowledge belonging to the client explicit to the designer. It is important to state that this negotiation is more effective when the designer is a layperson with respect to the complex implicit knowledge of the client. During these collaborative conditions the untangling of complex ideas have achieve the a-ha moments in the animations’ audiences.
This research expected to innovation designs can develop by more detail user-experience, that also reduce users unfamiliar and depressed; therefore, we investigated that people cognitive process on operated daily commodities, and we planned a tool to analyze users the area of contact and frequency. In experiment, we selected three objects whose size and shape are similar but haven’t limited way of operation. After that, we excluded feature of shape and make them consistent. We studied 30 participants response to operation and affordance, and analysis that by qualitative and quantitative. The result showed the participants have consistent posture of grasp, area of contact and way of operation in the same experimental situation; in addition, even the grip are the same, but following different functional parts, users still response a corresponding way of operation. So we suggest that shape only be as one of design factors on simple design style, and not the main factor. Designer should find other design techniques to enhance the user’s cognitive operation.
In recent years, architecture culture study is a popular direction in traditional vernacular dwelling research of China. Architectural culture, as the metaphysical part of a building, not only influences the formation of the building in design period, but also dominates the usepattern of the building after construction. However most of studies started with material form of dwelling from architectonic prospective ignored that architecture is a phenomenon of culture. The study of vernacular dwelling from cultural and other related academic fields is very necessary. Bei-nong is a transportation space in traditional vernacular dwelling of Jiangnan area in China. This paper tried to use the methods of urban history research to investigate this space. First of all, the particular time and region of bei-nong appearance has been observed and defined from historical and cultural background. Then, appearance reasons have been analyzed based on the social context and mainstream philosophy during the scope of time and region. In the end, the physical and social functions and the architecture construction of bei-nong have been summarized and ratiocinated from the former conclusions according to inductive reasoning theory. A real and comprehensive bei-nong is showed in the result of research, not only the physical form and history of architecture but also a history story about that place and time.
The technique and philosophy of traditional crafts are relevant aspects of our culture that should be passed on to future generations. However, using traditional crafts in modern life in their original form can be a challenge. It is essential to reinterpret them in the modern context, keeping the essence of tradition. For this purpose, we conducted case studies of Koishiwara and Yame in Fukuoka Prefecture, Japan, where Japanese traditional crafts are still manufactured. We used Koishiwara Pottery and Yame-Fukushima Buddhist Altar manufacturing as our investigation objects, conducted studies on their historical background and performed detailed observations of manufacturing techniques and processes. Thereafter, we developed the concept of “KATA” in Japanese, generally translated as type or prototype. “KATA” has several other meanings; in this study, we subdivided the concept into three elements, namely, shape, pattern, and style. We used “KATA” to build a framework to be used as a scaffold to help analyze the techniques and background of traditional crafts and reinterpret them to design products in the modern context. Based on reinterpretations, we developed a series of prototypes of modern tableware with the essential techniques of traditional crafts to verify the usefulness of the framework.
Design oriented educational institution around the world, project based learning is well practiced in local setting as well as global setting. Communication is one of the significant aspect in this learning settings. Currently, many design projects are implemented by members beyond their belonging organization, creating difficulties in face to face communication, especially when members are in different countries. This study proposes a new method for project-based learning in design education program implemented on international design workshop and discuss about outcome through empirical program.
This method is composed in three phases. First phase is online pre-workshop session using SLACK, where each member do their own researching and surveying on the specific topic related to the project, share and discuss them with other members. The second phase is face to face workshop, which all members gather in one place to work on the project intensively to make their group design proposal. The lastly in the post workshop phase, each member get back online to make reflection on the project, feedback them on the proposal, and make improvements. Also, compile and publish a project reports on the overall program for documentation. Through out the program, SLACK platform is used for basic communication and sharing data and information. S This program are operated in an international design workshop called “Global Design Workshop” of Chiba Institute of Technology(CIT, Chiba, Japan), with students from Chiba University(CU, Chiba, Japan) and Tunghai University(THU, Taichung, Taiwan) . The theme of the workshop was “New work place, space, style using IoT technologies.
Understanding the user’s situation is very important in the design process. There are many ways to understand a user’s situation – a designer might observe a user’s situation or a user
might record their own situation in Human Centered Design (HCD) file. However, the latter of these methods has not been very popular mainly because of the burden it place on the users. This research proposes a new smartphone-based design support application, named “HN camera”, which can be used to record the users’ situation, without any additional burden on them. This application is based on the ‘Extended Alethic/Deontic/Temporal (ADT) model’ concept. A user or a designer can understand and record the user’s situation based on the Physical factor, the Kansei factor, and the Cultural factor using HN Camera. The application was used in visualizing and analyzing tourists’ travel as a service design. Through this, the effectiveness of the proposed application was clarified.
Packaging is an essential element of design for both consumers and businesses. Product packaging functions both as a communication tool for product information and for brand messages. In addition, the role of visual elements and messages on snack packages are not well understood. This is particularly true from the standpoint of influencing the selection of snack food in children, even though there has been growth in the economic power of children as a consumer group. Therefore, this study examines: 1) the role of design variables such as typography, images, and the stylistic combination of these visual elements in affecting children’s snack food selection; 2) the role of health messages on children’s snack food selections; and 3) the role of perceived ‘healthiness’ in influencing children’s snack food selections. Digitally- simulated snack package images were created and sixty children ages 9 to13 were recruited for this study. From these design variables, ‘preferred-selections’ and ‘perceived healthy-selection’ of children in this age group were identified.
There is a growing need for sustainable fashion since the 2010s. As artists and designers explore the potential use of innovative materials developed by synthetic biology and DIY bio-hacking (Myers, 2010), recent practice-led research in fashion design aims at building the better relationship between ecological sustainability and biotechnology to cope with the limited resources available on the earth (Fletcher, 2008). Based on this issue on the material sustainability, this practice-led research analyzes the current production processes of the fashion industry to propose possible solutions by incorporating emerging biotechnology and fashion design in the context of sustainable design. As the methodology, the authors adopt two processes to make bio-garment. First, the experiment of DIY bio has been conducted for culturing ecological bio-material SCOBY (symbiotic colony of bacteria and yeast) that produces bacterial cellulose. The material has similar properties to leather. Second, designing the garment through 3D modeling has been tackled because we aim to make the bio-materials grow onto a 3D printed mold as ‘zero waste method’ (Rissanen; Mcquillan, 2016) , which can eliminate textile waste at the design stage. By the application of biological materials in the process of dressmaking, this practice led research has been analyzing the production line of the fashion industry and trying to propose sustainable solutions. Also the research aims to combine emerging biotechnology and sustainable fashion in order to establish the design process as an alternative design process to the polluting industry.
The authors performed a usability improvement study for a shoulder continuous passive motion (CPM) rehabilitation device based on the usability engineering process of IEC 62366, a mandatory standard for the development of medical devices. To enhance the usability of the entire development process for a shoulder CPM device, the authors 1) performed user research to determine design requirements and 2) evaluated the usability of the device. Requirements for a shoulder CPM device were derived through rehabilitation device comparisons, functional analysis, context inquiry and observation, and interviews. The authors used expert reviews and comparison usability evaluation methods for shoulder CPM prototyping. The methods and techniques of these design researches were declared in IEC 62366, but IEC 62366 does not include any guideline in detail. The results of this study can be used to guide the development of a user interface that meets the level of usability standards required for medical devices.
Based on a sound research plan, qualitative user data help designers understand needs, behaviors, and frustrations of a target user group. However, when a design team attempts to design for unfamiliar target groups, it is extremely difficult to accurately observe and understand them by simply using traditional research methods such as interviews and observation. As a result, the quality of user research data can be called into a question, which leads to unsatisfying design solutions. Inspired by a fiction writer’s technique of generating stories together with readers, we present the new method, Group Storymaking, that supports designers to quickly gain broad and clear understanding of an unfamiliar target group throughout a story-making activity with actual users. We envision Group Storymaking as a new user study method that designers can easily implement to learn about an unfamiliar target, involving actual users in a research process with less time and cost commitment.
Today, while profit maximization is still the bedrock of the capitalist model, people have embraced the idea of social contribution as a useful strategy in businesses. In this recent movement, Creating Shared Value (CSV) strives for a win-win solution that creates both social and business value. While in its early stage, CSV is showing promise and potential; society is witnessing a paradigm shift from practices of corporate social responsibilities (CSR) to CSV which is more sustainable and effective approach. Since Porter and Kramer originally introduced the concept in 2011, CSV’s application has expanded to many areas of business management, but it has not been discussed comprehensively in design research as of yet.
The title of this paper, “Designerly Way of Creating Shared Value” (DCSV) is inspired by Nigel Cross’s famous book, Designerly Way of Knowing (2006). ‘Designerly’ is an adjective describing ‘how’ designers think and behave that is different from professionals in scientific disciplines. The aim of this paper is to propose a new matrix illustrating the link between creating shared value and design, and to systemically describe the existing examples of DCSV (Cross, 2016). The paper will begin with an introduction to the concept of CSV followed by a brief literature review on CSV in design research. The second part will focus on demonstrating the new DCSV matrix by illustrating the four examples that exemplify it.
Over the last two decades, for-profit and non-for-profit organizations have increasingly adopted open collaboration, such as open innovation and crowdsourcing, as a strategy for innovation. Information and communication technology (ICT) has played a major role in forming open collaboration communities, but organizational design also needs to be considered to encourage the active participation and collaboration of actors. Nonetheless, organizational design aspect has seldom been addressed in developing open collaboration platforms. In this research, an organizational design framework for open collaboration was developed through a nature-inspired design approach. This framework suggests that the self-organization mechanism of social insects provides inspirations for the design of the platform, especially in terms of setting simple rules to induce behaviors of the actors and facilitating interactions among them. Since the open collaboration strategy depends on external actors who are not in employment relationship, an organization cannot force their contribution. Accordingly, the organization’s capability to induce the spontaneous participation of actors is essential, and it implies the potential role of designers in platform design based on a thorough understanding of actors. We thus claim that designers can bring a new perspective to organizational design. Open collaboration platforms serve as an exemplar in which designers contribute to the design of an organizational environment that fosters collaboration.
The more society gets complicated and developed, the more demand for various products. As a result, we are living in a flood of various products. However, considering how people consume and use products in their daily life, it is not difficult to find people transforming, changing the original purpose or adding value to existing products instead of buying new ones. This phenomenon has been defined as everyday design. In a sense that everyday design provides a better understanding of actual uses in real context, it deserves to be studied. Therefore, this paper attempts to figure out an underlying mechanism of everyday design. For this, a conceptual framework was developed, whose focus was on what triggers everyday design, what goals are set, and how a product is transformed. The conceptual framework was validated with a photographic inventory of users’ everyday design in our daily life. The conceptual framework could provide a better understanding of everyday design in a systematic way. If it is considered in the product development process, it could contribute to an increase of use satisfaction as well as sustainable design. The limitations and a further study are discussed at the end of the paper.
This research aims to investigate how Korean digital agencies practice design thinking for their website innovation. Based on a literature review on the design- thinking-driven web development process, multiple case studies of award-winning website projects were undertook. Through analyses of these cases, the following challenges and lessons were disclosed: (1) challenges – building a long-term, playful partnership with clients, leveraging decision-making executives’ design thinking awareness, and coping with limited resources (design thinking practitioners, budgets, and schedules) and (2) lessons – cross-functional collaboration, agile mobile-first development process, powerful visual storytelling, and compelling UX strategies and UI guidelines. Moreover, distinct approaches of design thinking practices were identified according to two website types: a brand promotion website – killer branding content-driven approach, and a service channel website – better UI/UXdriven approach.
Design processes are so complex that it is not easy to remember, reflect and record in detail after the actual processes are over. This paper proposes a notation to depict a design process as a whole while keeping its original complexity in terms of visual and structural aspects. The notion affords two types of structures to represent design processes, through activity units, a series of actions of the same kind, and design elements including ideas, prototypes and theories emerged, created, and applied during the design process. We use a design process of an actual design workshop as a case to derive the notation while using the online presentation tool “Prezi” as an interaction framework. We then investigated the depicted design process by re-experiencing the process as a first-person engagement using the designed notation. Prezi's animation mode allowed us designate a sequence along which viewers can experience the design process by zooming in some activity units and design elements, and its presentation mode allows us to look back the design process from the start to the end by following activity units arranged in the temporal order. Following the transitions among some design elements allows us to focus on essential objects in the design process. The depicted process illustrate that the two structures of activity units and design elements are not corresponding to but independent of each other.
In a few years, the number of apparatuses with touch panel displays like smartphones will increase. People who are visually impaired, hearing impaired and disabled can use tactile feedback for receiving incoming communications. However, opportunities for tactile feedback applications are limited.
Our hypotheses follow: as there are haptics patterns suitable for use cases, we will design haptics samples of tactile feedback and inspect their effectiveness. This study focuses on haptics patterns showing a relationship between the user’s impression and various use situations. Previous studies have been insufficient, so our target subjects inspected a limited number of objects.
This study consists of two inspections:
1) We collected various haptics patterns that users had defined and analyzed the first inspection. For the next inspection, we manufactured a smartphone prototype. We matched the impression of eight haptics patterns types that we got from the subjects in the first analysis with different situations and tested various replies.
Tests were repeated and recorded for various situations. As different haptics vibrations were added to emails, we inspected whether subjects could distinguish a difference in their meanings. Thus, we added different haptics patterns that corresponded to various situations. We concluded the hypothesis was effective for subjects. We could inspect the hypotheses in relation to subjects’ impressions of the haptics pattern.
2) Additionally, we obtained different results between elders and youths. Consequently, we suggested design guidelines for the new tactile feedback of the smartphone application. We suspect that haptics will be possible for a variety of interactive designs.
This paper presents the main process of a graduate course entitled ‘Generative Design Research for Sustainability’ offered in the Department of Industrial Design at Middle East Technical University in the spring semester of 2015/2016 through exemplary design research cases conducted by the graduate students at the doctoral level. These cases focus on the adaptation of the generative tool and the method, namely Experience Chart (EC) Guide tool (Kulaksız, 2016) and Experience Reflection Modelling (ERM) method (Turhan, 2013), in line with the graduate students’ particular research topics. First, the paper provides the course objectives, outcomes and process, then, it explains the EC Guide tool and the ERM method to be adapted and implemented within the context of the course. Then, these generative tool and method, and their adaptations are demonstrated through the exemplary cases (i.e. efficient use of working environment in design studios, lighting practices in kitchen environment, and interactive prototyping practice) selected from the submitted assignments considering their quality, originality and comprehensiveness. The main emphasis of this paper is on the adaptation and implementation of the EC Guide tool and the ERM method through providing the experiences, insights and suggestions of the graduate students who are also the co-authors of the paper. Based on that review, major conclusions and findings are presented through comparing and contrasting these cases for the future development of the course.
Flexible interaction technology became a one of key technology in nowadays. On the other hand, there are relatively little works has been done to understand how it should be designed especially for feedback of it. In this study, we investigate the guidelines for design feedback to flexible interaction systems through based on user’s expectation on them. We conducted user participated design workshop to collect user’s perspectives about feedback when they use flexible interactions. We gave 8 sets of actions which are generally used in flexible interaction and let 6 participants to generated ideas about visual, sound, and haptic feedback of them. From discussion session in the design workshop, we found out key factors about feedbacks. As a result of design workshop, we build guidelines of designing feedbacks for flexible interactions. This result will lead system designers to build flexible interaction to create flexible interaction which can improve the user experience.
Despite the increased popularity of online tools for remote teamwork and meetings, moderated collaborative activities between multiple users in early conceptual design stages, such as brainstorming sessions, are yet not well supported. In this paper, we introduce All4One, a networked system that enables multiple remote users to participate in a moderated visual sketching session. Each participant can independently draw and share sketches using a tablet, and a moderator uses a set of tangible tools to arrange and manipulate sketches that are displayed in real-time on a whiteboard. We present our prototype in detail and the results from a workshop study simulating a brainstorming session with designers who tested the system in practice. Results show several usage patterns and the potential of All4One for use in early design stages, and the importance of the role of the moderator as the facilitator of the design process. The paper concludes by identifying weaknesses and strengths of the current system and possible directions for future work.
Design is essential in product development but several small and medium-sized enterprises (SMEs) relatively capable of manufacturing are suffered from lack of in-house design ability. For new product design, these SMEs typically employ external designers. In this clientdesigner interaction, designers propose design solution alternatives to their clients, which clients may accept or reject. In some cases, clients provide designers further design requirements. A study on how interactions are performed and what effects these interactions have on the results of product development is essential to determine what is needed to achieve successful collaborative relationships. Thus, this study analyzed three design development cases that were previously performed to understand how interactions work between clients and designers and its effect on the outcomes. In all cases, the design team developed designs for the clients based on their technological requirements. This study focused on the effect of client stance on the process and deliverables. Clients usually take various actions that accept or reject design solutions or give additional demands. This is because clients take initiative in decision making. Clients' stance was divided into receptive and expressive stances. As a result, a receptive stance ensured the design capabilities of design consultants, whereas expressive stance confined design capabilities to some extent but a new design direction may be proposed based on a client's knowledge, information, and judgment.
In this study, based on the perception of older adults, fuzzy positioning of healthcare wearables and impacts of differentiated product positioning on human considerations and design communication strategies are studied. Empirical researches are performed by adopting both quantitative research (248 questionnaires for clustering and regression analysis) and qualitative research (15 cases for in- depth interview). The perceptions of older adults on product positioning are divided into three types: Tech-Aid, Fash-Acc, and Fash-Tech. Results indicate that the influential human considerations for each positioning were different from each other. Through coding and storyline analysis, diverse communication strategies are found for each positioning. The outcomes for each type are as follows. For Tech-Aid, wherein older adults lay emphasis on usefulness, ease of use, and privacy, the designers can adopt a calm communication strategy by giving priority to older adults’ control power, fitting symptoms, user-friendly, and cautious interconnection. For Fash-Acc, wherein older adults focus on personal image, aesthetic appearance, and ease of use, an active communication strategy for modeling a style for elderly fashion that agrees with aesthetic appreciation and simplified operation can be adopted. For Fash-Tech, wherein older adults require to integrate usefulness, ease of use, aesthetic appearance, comfort, privacy, and self-image, a persuasive communication strategy can be used, through which designers can offer older adults more data insights and entertainment, along with data association, and in the meantime, reduce data interferences and pay attention to style modality and appropriate display with context fusion and contact comfort.
Outside of academia, it is often hard for researchers to find the opportunity to continue our scholarship. As graduate students and PHD fellows, we spent years creating and testing our hypotheses, designing new methods, approaches and technologies and we are anxious to ascertain if our theories can survive in the real world.
How does a lone researcher engage the business community and convince them to test and use new cutting-edge research methods? The flipside is also true, you are a corporate researcher who would like to engage new methods and approaches to advance learnings, but you have limited resources and a business that demands results. How can you trust new methods and engage in new approaches while minimizing risk and exposure? The authors will give a 50,000-foot view of a new design research methodology, The FlashDraw, and how it can be complimentary alongside traditional research methods. An overview and example of the research process will be illustrated. The poster will also explore the challenges and successes of the partnership between two researchers, a recent graduate student and a corporate researcher, and their on-going journey to explore and establish best practices for researching on the “edge of the new”.
Typography is an important visible element of a cultural festival’s brand mark, yet is
overlooked within cultural festival research. An abundance of work has been published that
examines cultural festivals from cultural, economic, tourism, and place-making perspectives,
yet there is a shortfall in scholarly research addressing the key role typography performs to
engage audience participation through cultural festivals’ primary brand driver – the brand
mark. This paper critically considers triangulation as a constructive and effective research
framework for enquiry into typography deployed in the brand marks of cultural festivals and
provides a roadmap to further research. Offering an analysis of how and in what way
typography is being used in the brand marks for cultural festivals, this paper contributes a
discussion of appropriate research methods in the examination of this material. Triangulation
is engaged as a research technique combining the methods 1) content analysis, 2) case study
(text analysis) and 3) a semiotic analysis of typography as a framework to advantage three
perspectives on typography, capturing the complexities of the phenomenon. Through a pilot
study of 20 cultural festival brand marks from English speaking countries in 2016, the findings
show that triangulation of three methods is beneficial to uncovering a rich and nuanced
understanding of the role of typography in brand marks. Although many research methods are
available to design researchers, the authors argue that triangulation, is an appropriate method
to analyze typography used in the brand marks of cultural festivals as it allows for the
emergence of a heterogeneous understanding of the discipline.
The challenges facing many small nonprofit organizations are increasing at a greater rate than the internal capacities of many within this sector are able to address effectively. This situation has small nonprofits questioning their sustainability and ability to deliver their services in the long term. Often these small nonprofit organizations are working within a business model and communications paradigm that has remained unchanged for decades and one which is proving no longer effective in attracting awareness, engagement, and support. Many of these organizations are facing a critical failure requiring significant business model innovation to achieve both their short-, mid- and long-term goals. Design thinking is an avenue for nonprofits to achieve business model innovation by developing new, unique concepts supporting an organization’s viability and the processes for bringing those concepts to fruition. This case study outlines the design thinking process applied to business model innovation for a small, 22-year old, nonprofit approaching critical business failure.
We analyze life in urban district on the outskirts of Tokyo by ANT. This research is used to identify social and technological elements that are regarded as essential in the modern day and to develop methods that will link to a practical approach. Our presentation describes these methods in detail. We believe that it may be possible to identify particularly important elements in design methods that respond to the complications of the modern day in early modern wisdom and customs, which until now have been overlooked. Today, as the foundations of social norms and traditions that have previously been regarded as self-evident are swaying and the risk society is advancing, these new design methods can be used to respond to an array of issues with a high degree of complication, such as the deterioration of the mental environment and environmental problems without any discernible solution. Since the modern era began, design has solved social problems through the development of objects and systems. However, in terms of the problems stated above, it can also be pointed out that design is both unable to suggest basic solutions and, in addition, forms a part of the social structures that cause these problems. Approaches that follow laws of causality tied to modern methodology cannot be applied to complicated problems where the relationship between cause and effect is unclear. The use of new design methods makes it possible to decipher complicated relationships and apply pre-modern systems to modern life.
While it is common for landscaped and well-marked urban streets to have sufficient identification signs, which display place or street names, they often face issues regarding the provision of information (e.g., in sign placement) and inadequate orientation signs, which play an indispensable role in facilitating pedestrian movement. Insufficient signage can be partially addressed by supplementing signs with non-informational urban elements, such as streetlights or other urban features that provide different sorts of information. In order to result in smooth urban pedestrian movement, public signage systems require a balance between districts and streets and a system for presenting linked information. This study proposes that an urban element design system can be applied to the construction of public signage systems for pedestrians. There are several methods by which to accomplish this; each fulfills the needs of different districts and streets. For example, some strategies suggest ways to integrate information in areas with many urban elements, such as public signage, while others offer strategies for adding pedestrian signs and other elements alongside vehicular signs in areas with insufficient information. This article proposes a distribution graph of public signage as a concrete method for organizing the construction of public signage. Such a distribution graph is a way to visualize different distributions of sign type, and see clusters of street patterns. It is an effective way not only to planning new pedestrian signage systems, but also for revising plans with biased or insufficient signage distribution.
In an equally distressed and burgeoning community just outside of our major metropolitan city, there is a history of transformation efforts—from creative placemaking, to affordable housing initiatives, to economic re-development—which have all seemed to fall short in the area of community engagement.
From the creation of neighborhood festivals that have low resident turnout, to a backlash of discouraged citizens who feel unheard and uninformed, there was a need to re-consider how to involve this unique community—made up of four very distinct neighborhoods— in the imminent re-development of the area in which they live.
In the winter of 2016, our service design and creative strategy consultancy was brought in to a city-wide visionary community development project tied to our rapidly approaching bicentennial, in order to utilize service design methodologies as a way to engage communities and to design with organizations and community residents according to their needs and desires.
This short paper will highlight a case study of an ongoing collaboration between our consultancy; a non-profit organization dedicated to the growth of it’s community; a higher education institution with a legacy of community engagement; a local office of the country’s largest community development corporation focused on Creative Placemaking and community revitalization; and, most importantly, various residents and stakeholders.
The accompanying poster will visualize the process of engagement of various community stakeholders, tailored design research methods, and mechanisms for assessing short- and longterm
This paper demonstrates how Goffman’s frame analysis is applied in a research on designers’ experience with Cloud based digital tools. At the base of Goffman’s structure is the ‘primary frame’ - in this case designers’ experience with computer based digital tools. These tools’ transition to the Cloud initiated by businesses are called ‘fabrications’. Goffman’s ‘structural issues in fabrication’ such as ‘retransformations’ and the ‘nature of recontainment’ are also discussed through contemporary examples. These fabrications are used or ‘keyed’ by ‘active agents’ from various design fields. The data collected showed different levels of understanding of Cloud technology and the application of various tools in everyday design practices. Thus, the interviewees were clustered into three groups - designers, developers and artists. Their experiences form the creative, technology and experimental frame derived from keying of the primary frame. Design researchers can selectively borrow elements from frame analysis’ complex structure to build an effective user experience narrative.
This paper reports on the development of a mindful interdisciplinary design methodology in the context of the MinD project research into designing for and with people with dementia, which takes the particular focus on supporting the subjective well-being and self-empowerment of people with early to mid stage dementia in social context.
Existing research is for the most part focussed on functional support and safe-keeping from the perspective of the carer. References to decision-making and empowerment are predominantly related to action planning for dementia care or advance care planning. References to care and social interaction show that caregivers tend to take a deficit-oriented perspective, and occupation of people with dementia is often associated with doing ‘something’ with little focus on the meaningfulness of the activity. Furthermore, caregivers and people with dementia tend to differ in their perspectives, e.g. on assistive devices, which might offer support.
The MinD project, has therefore developed an interdisciplinary co-design methodology in which the voices to people with dementia contribute to better understanding and developing mindful design solutions that support people with dementia with regard to their the subjective well-being and self-empowerment a well as meaningful and equitable social engagement.
This paper discussed the design methodological framework and methods developed for the data collection and design development phases of the project, and their rationale. It thus makes a contribution to interdisciplinary methodologies in the area of design for health.
In this paper, we present results from a collaborative research between academic institutions and industry partners in the UK, which aimed to understand the experience of rail passengers and to identify how the design of technology can improve this experience. Travelling by train can often provide passengers with negative experiences. New technologies give the opportunity to design new interactions that support the creation of positive experiences, but the design should be based on solid understanding of user and their needs. We conducted in-depth, face-to-face semi-structured interviews and used additional questionnaires given to passengers on board of trains to collect the data presented on this paper. A customer journey map was produced to illustrate the passengers’ experiences at diverse touchpoints with the rail system. The positive and negative aspects of each touchpoint are plotted over the course of a ‘typical’ journey, followed by the explanations for these ratings. Results indicate how the design of technological innovations can enhance the passenger experience, especially at the problematic touchpoints, e.g. when collecting tickets, navigating to the platform, boarding the train and finding a seat. We finalise this paper pointing towards requirements for future technological innovations to improve the passenger experience.
The field of graphic design has continually evolved to encompass a wide scope of skills. From designing graphics to designing business strategies, graphic designers can be incorporated into all stages of industry projects. For some graphic designers around the world, broad uses of design practices are recognised as significant and are being applied to a breadth of large scale business and community sector frameworks. However, these skills are frequently underutilised and their value overlooked among small business projects. Perth-based design jobs, for example, are commonly outcome-driven and graphic designers are typically hired by clients at the end stage of business projects to only make project artefacts such as websites, business cards or brochures. Gjoko Muratovski, Director of The Myron E. Ullman, Jr. School of Design at DAAP, University of Cincinnati, puts forth that big businesses has benefitted greatly from integrating design’s intrinsic methods into all aspects of product and service development. In his paper titled Paradigm Shift: Report on the New Role of Design in Business and Society he states that “With the growing reputation of design as a catalyst for business innovation, designers are being invited to take on executive roles. Jonathan Ive (Apple, Inc.), Mark Parker (Nike, Inc.), David Butler (The Coca-Cola Company), and Todd Simmons (IBM Corporation) are perhaps the most notable examples of this emerging trend” (2015, p. 121). Literary statements such as this one, depict the rise of design using corporate giants as example. A discussion about the expansion of design amongst smaller business sectors, however, appears to be lacking. This report looks to explore this as the broad idea of my PhD. My paper views that there is gap in Perth local graphic design profession – graphic designers are not engaging with broader and more holistic design strategies such as those employed in service design. As part of my PhD project, this paper will discuss the literature review, research methods and design philosophy relevant to design strategies and processes used in graphic designers in Perth.
We recognize our past—history and heritage—as crucial to who we are (Grenville, 2007; Lowenthal, 2008; Nietzsche, 1874/1980). Significant regulatory and popular effort is expended in protecting places, buildings, and behaviors that link us to this past. International governance organizations recognize free association with history as a fundamental human right (e.g., Blake, 2011). Tangible representations of the past (e.g., objects, buildings, landscapes) are preserved as reminders of this past. Given the broad agreement that connections to the past are important parts of human existence, what are the connections between individuals’ security in knowledge of their own history and measures of public health?
The literature connecting preservation and public health is neither direct nor voluminous. A search for literature revealed a gap in knowledge about ways that preservation and public health relate. While some literature demonstrates possible connections between the two fields, no identified articles argue for the connection. Two examples from the preservation literature (Appler, 2015; Kearney & Bradley, 2015) explain situations where preservation issues have affected public health concerns, but do not acknowledge public health as part of their discussion. This exploratory essay briefly outlines core principles of public health and a review of literature from the public health and preservation and heritage fields that aligns with these principles. The essay concludes targeted research into the relationship preservation-public health is needed.
How can design orient people to an expanded sense of future possibility? Design researchers are beginning to recognize design’s potential role not solely in producing products, services and strategies but, instead, in shifting mindsets and behaviors. This shift requires a different view of the design practice, from engaging users to gather insights to be implemented, to that process as the actual material of the design. Borrowing from the framework of practice-oriented design, a first step in these processes is expanding participants’ understanding of future possibilities. In opening future possibilities, one recognizes an expanded range of futures and, ideally, engages in dialog with other people and their range of possibilities. This paper introduces mapping activities that are intended to reframe participants’ perception of possible futures. This study conducted pilot workshops with participants who were downsizing their home and struggling with decisions about their things and spaces. This paper argues that working with people already engaged in life transitions such as downsizing presents a rich opportunity for these futuring methods, as they are already beginning to grapple with designing for possible futures. These methods provide a stake in the ground for future exploration of potential methods to engender mindsets of possibility and engage in trialing methods like living labs.